Product Videos
Questions & Answers
What is the thread on the oil fitting for this gauge? 1/8 NPT?
Willys Jeep Parts Tech:
A-1198-ST is what screws to the back of the gauge. It takes a very odd ball size.
A-1198-ST is what screws to the back of the gauge. It takes a very odd ball size.
Hi, I have this gauge, but I need whatever hardware and hoses to run it from the engine to the gauge thru the firewall to the gauge. do you have this? What would the numbers for ordering be? What I have now is later aftermarket and the hoses etc won't fit in the back of the gauge Thanks...
Willys Jeep Parts Tech:
A-1198-ST A1198 A4436 these are what you need above to get to the lower galley on the drivers side of the block.
A-1198-ST A1198 A4436 these are what you need above to get to the lower galley on the drivers side of the block.
Can yo tell me the diameter of the guage? The body, not the face. Thanks!
Willys Jeep Parts Tech:
These are 2" gauges like original.
These are 2" gauges like original.
Does this gauge need a sender unit?Does it run directly off oil pressure or do I have to buy a sender unit?
Willys Tech:
No it does not need a sender. It is a mechanical gauge. You need part numbers: A1198 and A-1198-ST.
No it does not need a sender. It is a mechanical gauge. You need part numbers: A1198 and A-1198-ST.
I need a 12v electric gauge with sender. You don't state whether or not this gauge is electric or oil fed?
Willys Tech:
This is a pressure gauge just like original.
This is a pressure gauge just like original.
what does the oil gauge on an instrument panel mean?
Willys Tech:
This measures your oil pressure in the engine.
This measures your oil pressure in the engine.
YOU MIGHT ALSO BE INTERESTED IN
