Rear Leaf Spring U-bolt Clip
Fits 46-71 CJ-2A, 3A, 3B, 5, M38, M38A1, Jeepster Commando
New Replacement Rear Leaf Spring U-bolt Clip (4 required per vehicle)
Direct replacement U-bolt Clip to hold your leaf spring assembles to your axle tube secure. Measures on 3" centers. (2) required for rear drivers side & (2) required for rear passenger side.
Specifications:
4-134 L & F
6-225 V6
Fits:
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-66 CJ-5
50-52 M38
52-66 M38A1
66-71 Jeepster Commando (C101)
| Part # | Price |
|---|---|
| 640933 | $11.99 MSRP: |
$11.99
MSRP:
Product Videos
Questions & Answers
I have a 1964 M38a1 Marine jeep im looking for the rear u bolts it has a Dana 44 the inside height 7.5 inches
Willys Jeep Parts Tech:
Your M38A1 originally takes 640933 U-bolt for your Dana 44.
Your M38A1 originally takes 640933 U-bolt for your Dana 44.
I have a 46 CJ2A - There are 10 leaf springs and 1 rebound spring in the rear pack. The U bolts are 3" centers and measure 6", inside of the U to the tip of the threads. The U bolts appear to be to short, very little of the long nuts were catching the threads. Can you tell me what U bolt part number would work for my situation?
Willys Jeep Parts Tech:
These will have an overall length tip to tail of 7.25" so you should be all set with them. Email mike@kaiserwillys.com and we can help. Thanks!
These will have an overall length tip to tail of 7.25" so you should be all set with them. Email mike@kaiserwillys.com and we can help. Thanks!
what is length of front & rear bolts
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your vehicle information and we can help.
Please email mike@kaiserwillys.com your vehicle information and we can help.
Have a 46cj2a that Ive discovered has dana 27rear end instead of a 41. Need the correct ubolts for the rear end , as my set that I orderd when I thought it was a 41....didnt fit correctly
Willys Tech:
You need qty 4 of part number: A575 U-bolts for the rear Dana 27.
You need qty 4 of part number: A575 U-bolts for the rear Dana 27.
What is the dia of the bolts? 7/16 or 3/8?
Willys Tech:
I will have to double check but I believe they are 7/16 like original.
I will have to double check but I believe they are 7/16 like original.
Just ordered a set for rear axle, do you know the torque spec for the nuts? Thanks.
Willys Tech:
The book doesnt specify one. Just torque down till tight.
The book doesnt specify one. Just torque down till tight.
Will the length of these fit my original 13 leaf springs on my 1953 M38a1?
Willys Tech:
Yes these will be the proper lenght for you.
Yes these will be the proper lenght for you.
What part number do I use for the rear spring u-bolts. This is the only one listed for a 45 MB but doesnt show that it fits a 45 in lyour product description. thank you
Willys Tech:
For 1941-1945 MB/GPW you want to use part number: A575 for a quantity of 4 for the rear
For 1941-1945 MB/GPW you want to use part number: A575 for a quantity of 4 for the rear
YOU MIGHT ALSO BE INTERESTED IN
