Product Videos
Questions & Answers
i need to know if do you have this part in stock
Willys Jeep Parts Tech:
No, we are unable to get this part.
No, we are unable to get this part.
please explain what type of additional machining is required to this connecting rod. thank you
Willys Jeep Parts Tech:
They need to be properly weighted to have a match set and honed.
They need to be properly weighted to have a match set and honed.
My CJ-3b has an F-head engine cobbled together in the 1970s. When I pulled the oil pan I discovered that it has two different sized bolts in the piston rods (no wonder it vibrates). Will this require changing out the oddball pistons/rods so that they match?
Willys Jeep Parts Tech:
Yes, that is what i would do and make sure they balance out too.
Yes, that is what i would do and make sure they balance out too.
so my rod #4 is a little beaten from being forced out via hammer but all my rods are balanced will buying an not balanced rod affect anything
Willys Jeep Parts Tech:
You would want to make sure all your rods are balanced to prevent any unnecessary vibration or wear.
You would want to make sure all your rods are balanced to prevent any unnecessary vibration or wear.
My willys repair manual describes the stock connecting rods as forged units. These are described as cast. Is there a difference?
Willys Jeep Parts Tech:
This is just how they are currently made in new manufacter.
This is just how they are currently made in new manufacter.
Can I use these connecting rods on a Willys Jeep engine (S/N MB356715)?
Willys Tech:
This is for all 4-134 L & F gear driven engines for Willys.
This is for all 4-134 L & F gear driven engines for Willys.
YOU MIGHT ALSO BE INTERESTED IN
