Product Videos
Questions & Answers
My brake peal is 3-1/4" diameter does this fit
Willys Jeep Parts Tech:
Approx 2-3/8" like original
Approx 2-3/8" like original
Any idea where I can find the actual brake pedal linkage that this attaches to? I have a non stock setup on a 53 PU that is interfering with a non-stock accelerator!
Willys Jeep Parts Tech:
Good used only. Email mike@Kaiserwillys.com and i can get you some salvage yard numbers.
Good used only. Email mike@Kaiserwillys.com and i can get you some salvage yard numbers.
I have a Willy's 55 truck. A previous owner removed the brake pedal foot bracket that the pedal rubber pad fits onto. Do you carry this?
Willys Tech:
That is available good used only. Please call us toll free. We can help you.
That is available good used only. Please call us toll free. We can help you.
I am just about finished with my 47 willys pickup. I am tall and am hitting my knees on the steering wheel when I lift my foot to press the brake and the clutch. If I was to cut an inch or two off of the pedal length just below the foot bad and weld the pad back on do you think there would be any issues with operation of the clutch and brakes? It seems like there would be enough play in the pedal before you feel the clutch or brake kick in.
Willys Tech:
I wouldnt think so but you would need to make sure your throw on the clutch is still ok before doing so.
I wouldnt think so but you would need to make sure your throw on the clutch is still ok before doing so.
I need the mounting hardware for this rubber pad. Do you sell those?
Willys Tech:
They just slide over the pedal arm. There really is no hardware.
They just slide over the pedal arm. There really is no hardware.
YOU MIGHT ALSO BE INTERESTED IN
