Product Videos
Questions & Answers
How do I know if my core is good before I send it ? Can I just send my old one without having it tested in some way ?
Willys Jeep Parts Tech:
I would inspect it visually on your end. We will check them when we get them as well obviously. Thanks!
I would inspect it visually on your end. We will check them when we get them as well obviously. Thanks!
Do you buy cores outright? I have three that I don't need. I don't need a new one, these are just extra. One has been ground once while the other two are standard, but all three need to be ground before using.
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com to help out. Thanks!
Email mike@kaiserwillys.com to help out. Thanks!
Hello, so it's the price of the crank plus the additional $500 core fee.?
Willys Jeep Parts Tech:
That is correct but that core fee is 100% refunded once we received your old crankshaft. Thanks
That is correct but that core fee is 100% refunded once we received your old crankshaft. Thanks
What oil hole do I need to drill if I have the timing chain crank and want to use it with timing gear?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can try to help out.
Please email mike@kaiserwillys.com and we can try to help out.
Bare stripped block? I can see the ones that have been populated. But how can you tell about a bare stripped block? What kind od cam?
Willys Jeep Parts Tech:
Not sure I understand the question. Please email mike@kaiserwillys.com and I can try to help. Thanks!
Not sure I understand the question. Please email mike@kaiserwillys.com and I can try to help. Thanks!
I see that you typically use a 3" foam for the CJ2A front seat bottoms. Would it be possible to get a 2" thick foam front seat bottom (cover and cushion)? This would allow for just a little more room. Thanks.
Willys Jeep Parts Tech:
Yes, we can do that. Please call us toll free and we can accommodate.
Yes, we can do that. Please call us toll free and we can accommodate.
I have several L134 blocks. some have parts on them but one is bare. How can I tell if it is a chain or gear type?
Willys Jeep Parts Tech:
The front timing is where you can tell. If its gear to gear or chain. Or you can look at the oil pump if its there and see the orientation of the gear.
The front timing is where you can tell. If its gear to gear or chain. Or you can look at the oil pump if its there and see the orientation of the gear.
Is this item in stock and available to ship?
Willys Jeep Parts Tech:
The crankshaft usually takes us about a week to ship. Thanks
The crankshaft usually takes us about a week to ship. Thanks
How can I tell if I have a gear driven crank or a timing chain crank
Willys Jeep Parts Tech:
Take the timing cover and see if your gear to gear or have a chain.
Take the timing cover and see if your gear to gear or have a chain.
I have two L-134 engines. One is a new casting. One crank shaft has the bolt on counter weights and the other is completely cast. What are the difference between the two and are they interchangeable?
Willys Jeep Parts Tech:
They will interchange with each other. Just double check your dowel pins to the flywheel to make sure it matches there.
They will interchange with each other. Just double check your dowel pins to the flywheel to make sure it matches there.
Are these blocks made in the USA?
Willys Jeep Parts Tech:
These are reground original cranks so yes, they are US made.
These are reground original cranks so yes, they are US made.
I would like to know what the postage is to Sarasota, Florida, 34249, and what is the shipping weight?
Willys Jeep Parts Tech:
These are oversize and $50 to ship. They weigh approx 65 pounds.
These are oversize and $50 to ship. They weigh approx 65 pounds.
WIll this crank work in a 134 timing chain motor?
Willys Tech:
We can do one that will for you. Please call us toll free.
We can do one that will for you. Please call us toll free.
Do you know the size of standard main and rod bearing surfaces?
Willys Tech:
This varys depending on the crankshaft. They are factory reground and typically come in between .020-.040" u.s.
This varys depending on the crankshaft. They are factory reground and typically come in between .020-.040" u.s.
1954 willys jeep works for cj and its weight
Willys Tech:
Yes this is correct for all the vehicles listed above.
Yes this is correct for all the vehicles listed above.
Will the crankshaft from a L 134 that had a timing chain work for a F 134 that has a timing gear
Willys Tech:
Yes, but you will have to drill the oil hole. A crankshaft from any 4-134 gear driven are the same L or F.
Yes, but you will have to drill the oil hole. A crankshaft from any 4-134 gear driven are the same L or F.
Is ther any other bolts in the crank to flywheel other than the 2 pins?
Willys Tech:
Also try part number: 632157
Also try part number: 632157
i have 1953 willys with overhead valve motor what size is it
Willys Tech:
134 cu. in.
134 cu. in.
YOU MIGHT ALSO BE INTERESTED IN
