Product Videos
Questions & Answers
Do you have this boot for a 1964 wagon with a dual shift lever for (4) wheel drive?
Willys Jeep Parts Tech:
745386A is the part number.
745386A is the part number.
Do they make a retaining ring for the dual shift lever boot # 745386?
Willys Jeep Parts Tech:
That you have to reuse your old one or we can get good used.
That you have to reuse your old one or we can get good used.
54 wagon three on floor with overdrive and 4wd what boot?
Willys Jeep Parts Tech:
This boot is for your transfer case. The 907107 is for your transmission. PTOBOOT part number is for your overdrive/PTO assembly.
This boot is for your transfer case. The 907107 is for your transmission. PTOBOOT part number is for your overdrive/PTO assembly.
what is diameter of this boot need greater than 4" 5.5 or 6 would be great
Willys Jeep Parts Tech:
5.25 x 4.75" at base.
5.25 x 4.75" at base.
Ok I see the PTOBOOT, and the dual Transfercase boot but where is the Transmission boot for a 55 wagon?
Willys Tech:
You want part number: 907107
You want part number: 907107
What is the difference between this 745386 and the 745386A part. I am not sure yet if I have a mixed truck or not 52-54. thanks, whf
Willys Tech:
They are a different pattern and size because of the difference in floor pan.
They are a different pattern and size because of the difference in floor pan.
I see two holes in this boot - for the main shifter and OD. Is there a boot for the 4wd and lo-high 4wd levers for a 55 Willys Wagon?
Willys Tech:
The holes in the transfercase boot are for your Hi/Low shifter and 4wd In/Out lever. The overdrive was always a separate boot. We have that one too: PTOBOOT
The holes in the transfercase boot are for your Hi/Low shifter and 4wd In/Out lever. The overdrive was always a separate boot. We have that one too: PTOBOOT
YOU MIGHT ALSO BE INTERESTED IN
