Product Videos
Questions & Answers
Is the dimmer switch retaining ring B0617 an original piece for the 1949 CJ3a? I'm looking for evidence of one being there at one time.
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
On the dimmerswitch there are 3 places to hook up to which is the one to hook up the power supply?
Willys Jeep Parts Tech:
Center is power. The LH/RH posts are HI/LO beam.
Center is power. The LH/RH posts are HI/LO beam.
Will this work on a 24volt system. M39 1951
Willys Jeep Parts Tech:
No, this if tor 6 or 12 volts. There are two options for the 24 volt system and it depends on whether you have Douglass (8380675) or Packard (A1DIMMER) connections. Thanks
No, this if tor 6 or 12 volts. There are two options for the 24 volt system and it depends on whether you have Douglass (8380675) or Packard (A1DIMMER) connections. Thanks
Please send wireing diagram.
Willys Jeep Parts Tech:
Sorry, i dont have a diagram but really its just the hi and low wire on either side then power wire going to this.
Sorry, i dont have a diagram but really its just the hi and low wire on either side then power wire going to this.
Could you send wire diagram this switch?
Willys Tech:
The center post is power. The posts to either side of the center post are hi/low. You can wire it either way.
The center post is power. The posts to either side of the center post are hi/low. You can wire it either way.
Is this for 6v or 12v? Will this work with a 12v system?
Willys Tech:
It is for both 6volt and 12volt.
It is for both 6volt and 12volt.
will this switch work for an FC-170
Willys Tech:
Yes it should work just fine.
Yes it should work just fine.
YOU MIGHT ALSO BE INTERESTED IN
