Questions & Answers
This is the correct fitting to my 61 Wagon emergency brake handle. I need the other end to attach to a transfer case brake drum lever and I assume that 58" length will be sufficient. The old brake cable I removed was jury rigged and measured 72". The other Orschlen brake cable is not the correct fitting from my brake handle. Thanks.
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com some more vehicle information and we can help you out. It is correct for the vehicles listed.
Please email mike@kaiserwillys.com some more vehicle information and we can help you out. It is correct for the vehicles listed.
Will this fit my 1956 Willy's 4x4 Utility Wagon? I am trying to determine if I have a rear or front e handbrake. Thank you for the help. Bard
Willys Jeep Parts Tech:
Yes, this should be the correct front cable for you. Just to be sure though, I would make sure the length is correct at 58". Thanks
Yes, this should be the correct front cable for you. Just to be sure though, I would make sure the length is correct at 58". Thanks
The current cable on my 1959 4wd wagon is 50". Can I replace it with this one?
Willys Jeep Parts Tech:
Your cable should be 58" like the one we sell.
Your cable should be 58" like the one we sell.
I have a 1950 Jeepster and the filler neck is part of the gas tank (1 piece design). Is this tank the same 1 piece design or if not, does it come with a seperate filler neck.
Willys Tech:
It is separate. You just need a filler hose and you cut off your old filler neck and it works perfect.
It is separate. You just need a filler hose and you cut off your old filler neck and it works perfect.
will the 906243 brake cable fit the aero eagle. If not can you supply one?
Willys Jeep Parts Tech:
Sorry, I don't believe so. I don't have a good listing for the Willys Aero.
Sorry, I don't believe so. I don't have a good listing for the Willys Aero.
What sending unit do I use for this tank my willys is a 62 utility wagon?
Willys Tech:
914848 is the part number for the Willys Station Wagon
914848 is the part number for the Willys Station Wagon
Will this tank fit 46-50 Panel truck?
Willys Tech:
If you have a Willys Truck the part number for the tank is: MTS-0010 or 906152
If you have a Willys Truck the part number for the tank is: MTS-0010 or 906152
What tank fits a Willys Panel or also known as a Willys Sedan Delivery? It is a station wagon with no side windows.
Willys Tech:
That is a Willys Station Wagon basically. This tank does.
That is a Willys Station Wagon basically. This tank does.
Does the Part# 906243 fit a 51 wagon? If not, do you offer one?
Willys Tech:
646592 is the part number you want to order.
646592 is the part number you want to order.
Is it necessary to rubber mount this tank?
Willys Tech:
I would recomment it.
I would recomment it.
Is the filler neck installed on this tank?
Willys Tech:
You need to use your old steel filler neck. We have the connection hose part number: 200462
You need to use your old steel filler neck. We have the connection hose part number: 200462
What is the fuel capacity of this tank?
Willys Tech:
These are 15 gallons like original.
These are 15 gallons like original.
Does this cable fit a 1955 4 wheel drive utility wagon?
Willys Tech:
Yes this is the correct one.
Yes this is the correct one.
YOU MIGHT ALSO BE INTERESTED IN
