Product Videos
Questions & Answers
In the picture for the part 906467 there are pictures Of two different pressure plates. Is there a difference for the L-34?
Willys Jeep Parts Tech:
Theres no difference. Just different manufacturers.
Theres no difference. Just different manufacturers.
I note PN 906467 is listed for 1946-53 trucks. Mine is a 1957 F134, is this the correct PN for this model? Thanks
Willys Jeep Parts Tech:
Yes, if you have the 4-134 motor it will be correct for your Willys Truck.
Yes, if you have the 4-134 motor it will be correct for your Willys Truck.
Mike, do you know of any problem it would cause to adjust the fingers out on this pressure plate?
Willys Tech:
These are preset to factory spec. Then adjust your free pedal travel to 1 and you should be all set.
These are preset to factory spec. Then adjust your free pedal travel to 1 and you should be all set.
Do the fingers typically need to be adjusted after installing a new clutch kit? My clutch relaease cable appears to be too long now and I can't take the slack out of it because I run out of thread on the cable since installing the new clutch.
Willys Jeep Parts Tech:
No, these are pre adjusted. You should be approx. 1" of free pedal travel. This is done in the clutch cable.
No, these are pre adjusted. You should be approx. 1" of free pedal travel. This is done in the clutch cable.
Is there any procedure for adjusting the pressure plate? I need to adjust the fingers.
Willys Tech:
Call us toll free. The mechanics manuals go over it. We sell them but can help you over the phone too.
Call us toll free. The mechanics manuals go over it. We sell them but can help you over the phone too.
Do you ship international to Australia?
Willys Tech:
Yes we ship daily international. Please email us: mike@kaiserwillys.com your full list of what you want and full address.
Yes we ship daily international. Please email us: mike@kaiserwillys.com your full list of what you want and full address.
Does this require adjusting? or is it a bolt on?
Willys Tech:
These are ready just to bolt in and go. There is no adjusting required.
These are ready just to bolt in and go. There is no adjusting required.
YOU MIGHT ALSO BE INTERESTED IN
