Questions & Answers
Hi I have at Dana 27 Front Axle with a Pinion Gear Set 39-8 (801925) Ratio 4.88 . Can i take this for Dana 44 Rear Axle? This is the same Ratio but its not the same Gear (44x9) Or which i must order? Thanks very much best Regards Roman
Willys Jeep Parts Tech:
This 907062 is for any Willys that had a Dana 44 with the 4.88 ratio.
This 907062 is for any Willys that had a Dana 44 with the 4.88 ratio.
Will this work on a 52 m38 with a 4.88 front axle?
Willys Jeep Parts Tech:
This is for your Dana 44 rear end 4.88 ratio.
This is for your Dana 44 rear end 4.88 ratio.
i just bought a 1950 cj3a and im sure its got the stock 5.38 gears for both the dana 25 and 44 and was wondering if this 4.88 set will work in the dana 44 that i have and of course the matching 4.88 set for the dana 25
Willys Jeep Parts Tech:
If your trying to get more top end - i would highly recommend going to the SATURN overdrive we sell. Email mike@kaiserwillys.com or call us toll free and we can see what we can do on your gearing.
If your trying to get more top end - i would highly recommend going to the SATURN overdrive we sell. Email mike@kaiserwillys.com or call us toll free and we can see what we can do on your gearing.
What is the best way to determine the rear gear ratio in my 53 CJ3B....no tag was on the rear. Thanks
Willys Jeep Parts Tech:
If you look on the ring or pinion, you should see some numbers. Get those numbers and give us a call toll free at 888-648-4923 and we can set you up. Thanks
If you look on the ring or pinion, you should see some numbers. Get those numbers and give us a call toll free at 888-648-4923 and we can set you up. Thanks
where are these manufactured at. ? Are they made of foreign or American steel ?
Willys Jeep Parts Tech:
I do believe these are NOS but will confirm.
I do believe these are NOS but will confirm.
How do I know what ring and pinion I have . I have the gear exposed but none of the numbers look familiar.
Willys Tech:
You can email mike@kaiserwillys.com your numbers and we can ID for you. Or just count the number of teeth on the ring and number of teeth on the pinion and divide.
You can email mike@kaiserwillys.com your numbers and we can ID for you. Or just count the number of teeth on the ring and number of teeth on the pinion and divide.
Will the 4.88 ring and pinion gear set work in a Dana 44 rear end from a 1953 Willys wagon?
Willys Tech:
Yes it should work fine. You need to make sure you match your front end to it too.
Yes it should work fine. You need to make sure you match your front end to it too.
YOU MIGHT ALSO BE INTERESTED IN
