Product Videos
Questions & Answers
is the fitting 7/16 on both ends? The part I received is 7/16 one end, 1/2 inch on the other.
Willys Jeep Parts Tech:
No they are not, they are national pipe thread. Give us a call and we can assist you.
No they are not, they are national pipe thread. Give us a call and we can assist you.
I will keep it simple this time. Will the hose fittings on this hose fit an L head engine
Willys Jeep Parts Tech.:
As long as the correct fitting are there on the canister end they should
As long as the correct fitting are there on the canister end they should
Would this hose work on an Lhead engine. The 10" hose you have listed seems a little tight on my engine and I would like a slightly longer one that 10" in length
Willys Jeep Tech.:
Your canister is probably sitting too high on the camps.
Your canister is probably sitting too high on the camps.
I'm a little confused about the length. How does a 12 inch hose go from the oil filter mounted on the firewall to the top of the timing cover I front of the engine?
Willys Jeep Parts Tech:
The canister didn't mount on the firewall. It was mounted ontop the cylinder head originally.
The canister didn't mount on the firewall. It was mounted ontop the cylinder head originally.
what is the differences between the oil hoses with parts numbers 910290, 910290 A, 910290 B
Willys Jeep Parts Tech:
They are all interchange part numbers. The vehicles share the same hose.
They are all interchange part numbers. The vehicles share the same hose.
Will this flexible oil line work between engine block to steel line to oil pressure gauge?
Willys Jeep Parts Tech:
Yes, this could work depending on your application with the right fittings.
Yes, this could work depending on your application with the right fittings.
Does this hose have swivels at both ends or is one end solid ? thanks
Willy Tech:
This has one swivel end like original.
This has one swivel end like original.
YOU MIGHT ALSO BE INTERESTED IN
