Questions & Answers
I'm looking to have taillights installed on my jeep's body (current ones only on a Kelly hardtop) and there's no previous installation holes on the back of the body.. were these placed on the lower edge? And are these correct for a 1961 CJ-5 (non tuxedo)
Willys Jeep Parts Tech:
Yes, on the tail light panel a few inches from the bottom between quarter panel and tail gate surround.
Yes, on the tail light panel a few inches from the bottom between quarter panel and tail gate surround.
Where can I get a replacement lens? Thanks M
Willys Jeep Parts Tech:
Sorry, we can only get complete assemblies.
Sorry, we can only get complete assemblies.
Is there something that needs to be done to these lights to make them function as a tail light and blinker light. The one I got doesn’t ground through the housing (#912227) it has two wires and one of them has to be grounded to make the light work. It will work as a tail light or blinker but not both and the same filament lights up either way you hook it up.
Willys Jeep Parts Tech:
You just need to use a dual filament bulb and wire into your turn signal harness.
You just need to use a dual filament bulb and wire into your turn signal harness.
Is there a LED bulb option available?
Willys Jeep Parts Tech:
12403.84 in 12 volt.
12403.84 in 12 volt.
I like these and want to keep close to original. Do you sell the 6V bulbs with dual filament for blinker operation? If so, do you have part number.
Willys Jeep Parts Tech:
We do have a bulb for them. Please email mike@kaiserwillys.com to help. Thanks!
We do have a bulb for them. Please email mike@kaiserwillys.com to help. Thanks!
I added these tail lights #12403.84 to my 1957 CJ5. I need signal lights and break lights added. What parts do I need to order to get the additional lights required or is there 1 unit that will do all 3 functions - tail lights, break light and turn signals?
David:
One wire is the running light, the other is the brake light. It grounds through the housing.
One wire is the running light, the other is the brake light. It grounds through the housing.
Willys Jeep Parts Tech:
These function as brake and tail lights all in one.
These function as brake and tail lights all in one.
are these also blinkers
Willys Jeep Parts Tech:
Yes, they will work as blinker lights as long as you change the bulb to a dual filament bulb. Thanks
Yes, they will work as blinker lights as long as you change the bulb to a dual filament bulb. Thanks
Can you tell me the approx. diameter of these lights? thanks
Willys Jeep Parts Tech:
4" diameter lens
4" diameter lens
Do you have replacement lens for these lights?
Willys Jeep Parts Tech:
No sorry you can only get a complete assembly.
No sorry you can only get a complete assembly.
Do items 912227 and 912243 contain glass or plastic lenses? Thanks
Willys Tech:
These are glass like original.
These are glass like original.
Will this rear light assembly and the corresponding passenger side light work with the turn signals?
Willys Tech:
Yes, these can we wired in for turn signals.
Yes, these can we wired in for turn signals.
Do these come with the bulbs?
Willys Tech:
Yes these do come with 12 volt bulbs in them.
Yes these do come with 12 volt bulbs in them.
Can I get this in chrome. I believe they were on 65 tuxedo park mark iv. is that correct?
Willys Tech:
No these are not available in chrome.
No these are not available in chrome.
Are these the EXACT REPLICAS of the originals? I thought the originals had a chrome bezel?
Willys Tech:
Early CJ-3B's used a chrome bezel. It depends on your year. Early CJ-3B's used part number: 801157
Early CJ-3B's used a chrome bezel. It depends on your year. Early CJ-3B's used part number: 801157
YOU MIGHT ALSO BE INTERESTED IN
