Product Videos
Questions & Answers
I have a 1952 M38 24V. Can I use these if I’m not looking for the original waterproof cables and plugs right now?
Willys Jeep Parts Tech:
Yes, as long as you aren't 24V.
Yes, as long as you aren't 24V.
I am staying with 6 volt. Will the wire from coil to distributur be long enough thru the dash
Willys Jeep Parts Tech:
Not sure what you are asking about. Please give us a call and we can help you.
Not sure what you are asking about. Please give us a call and we can help you.
Is this wire set close to the original wires that came on the vehicle? Thanks.
Willys Jeep Parts Tech:
Yes proper USA made wire set.
Yes proper USA made wire set.
Do you have to add anything to the ends or are these a direct plug in to the distributor cap?
Willys Jeep Parts Tech:
They are ready for install.
They are ready for install.
Are these solid core wires or resistor type wires?
Willys Jeep Parts Tech:
Solid core.
Solid core.
Will these work with electronic ignition modules that replace the points and condenser?
Willys Jeep Parts Tech:
Yes, these should.
Yes, these should.
What are the brass tacks? How do you install without crimps?
Willys Tech:
Those just stick thru the end of the cable and crimp in place. They are the contacts.
Those just stick thru the end of the cable and crimp in place. They are the contacts.
Since I'm going 12 volt do I need a shorter coil to distributor wire than the original wire that came from the dash mounted coil?
Willys Tech:
You will want to mount your coil on your block next to the distributor on the existing studs that are there. If your missing the bracket its part number: MSD8213
You will want to mount your coil on your block next to the distributor on the existing studs that are there. If your missing the bracket its part number: MSD8213
I have a dash mounted Keyed coil. Do you have a coil wire that would be long enough to reach that?
Willys Tech:
You are probably going to have to pick up the suppression wire locally. Typically you can buy it in universal lengths.
You are probably going to have to pick up the suppression wire locally. Typically you can buy it in universal lengths.
How can I shorten the suppression cables for my flat head 134 ? They seem to be much longer than my current old ones.
Willys Tech:
Yes these can be trimmed.
Yes these can be trimmed.
what is the firing sequence of the CJ-3A and the CJ-2A
Willys Tech:
1-3-4-2
1-3-4-2
Are they angled or straight? The description says they have the proper 90 degree angle but the photo shows them as being straight.
Willys Tech:
The image is going to be updated. They have the proper 90 degree bend on them.
The image is going to be updated. They have the proper 90 degree bend on them.
YOU MIGHT ALSO BE INTERESTED IN
