Questions & Answers
Mike, I have a 1957 CJ5 onto which I just installed a Koenig PTO and winch. The exhaust pipe had to be cut for the winch driveshaft and I am looking for a solution. I understand that one solution is to install the MB exhaust system to run the exhaust to the passenger side to avoid running the exhaust under the cross member and putting it in harm’s way. Do y’all have any other suggestions?
Willys Jeep Parts Tech:
I think the best way would be to modify your long pipe for clearance but yes, I have heard of a MB kit working as well with modification as well.
I think the best way would be to modify your long pipe for clearance but yes, I have heard of a MB kit working as well with modification as well.
I have a 52 cj3a, and like this style exhaust. Would it fit?
Willys Jeep Parts Tech:
I think you may have some clearance issues around the bellhousing but it could possibly be modified to make work.
I think you may have some clearance issues around the bellhousing but it could possibly be modified to make work.
I have a CJ2a which I've mostly "made" into an MB-clone. The current civilian exhaust exists rear of the frame. I'm looking to replace it with something appropriate to an MB which exits right passenger side. Do you know whether this would be suitable?
Willys Jeep Parts Tech:
You probably could, just have to worry about spacing.
You probably could, just have to worry about spacing.
Willys Jeep Parts Tech:
Im sure this kit could be used with some modification to suit your needs.
Im sure this kit could be used with some modification to suit your needs.
Do you have an exhaust system for a 1969 cj5 6 cyl
Willys Tech:
When you have the V6-225 you have to make your exhaust locally.
When you have the V6-225 you have to make your exhaust locally.
I have an early civilian CJ2A with the tool indentation body. Would this be the proper exhaust system for my Jeep?
Willys Tech:
If you have a CJ-2A You will need to use the civilian exhaust system or be original. However this may work...
If you have a CJ-2A You will need to use the civilian exhaust system or be original. However this may work...
The body/frame of my Jeep is a 44MB, turns out the engine is out of a 47 CJ-2A. Would this kit still work or should I be looking at the CJ-2A kit?
Willys Tech:
This should still work just fine for you.
This should still work just fine for you.
YOU MIGHT ALSO BE INTERESTED IN
