Product Videos
Questions & Answers
Can i adapt this to a 46 CJ2A
Willys Jeep Parts Tech:
Yes, this should work for you as well on the 2A.
Yes, this should work for you as well on the 2A.
Can I order new blades for the hand wipers I purchased several years ago? I'm in Pine, Arizona Quote please.and thanx.
Willys Jeep Parts Tech:
That we can only get complete units.
That we can only get complete units.
I am interested in buying it, but I need to know the total length between the two handles
Willys Tech:
It is approx 23.5 pivot to pivot
It is approx 23.5 pivot to pivot
How much to ship these to the UK (airmail or snail mail ?)
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thnaks!
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thnaks!
I did not get directions on how to install this manual wiper set!
Willys Jeep Parts Tech:
The manual wipers shafts just go thru the pre-existing holes in your frame. Please email mike@kaiserwillys.com any specific questions you have and we can help answer. Thanks!
The manual wipers shafts just go thru the pre-existing holes in your frame. Please email mike@kaiserwillys.com any specific questions you have and we can help answer. Thanks!
What is the measurement from center of pivot to end of blade? And are there multiple blade lengths available
Willys Jeep Parts Tech:
23 1/2" sorry, only one style of blade.
23 1/2" sorry, only one style of blade.
will this work on a 1955 CJ5?
Willys Jeep Parts Tech:
I'm sure you could mount it but manual wipers were not original for the CJ-5. Thanks
I'm sure you could mount it but manual wipers were not original for the CJ-5. Thanks
Will the hand operated windshield wiper kit fit a 1947 willys jeep? Item #A11433
Willys Jeep Parts Tech:
Stock number: MANWIPER is what i recommend. But I do think the spacing is the same.
Stock number: MANWIPER is what i recommend. But I do think the spacing is the same.
I have a modified CJ 3B 1954 Jeep. One windshield wiper hand crank from lower portion of shield driver side. Holes exist for passenger side. Will the tandem hand crank listed here fit ok. Thanks
Willys Jeep Parts Tech:
If the 3B has already been modified than I'm sure you can make this unit work. Thanks
If the 3B has already been modified than I'm sure you can make this unit work. Thanks
Will this work on a 58 CJ5?
Willys Jeep Parts Tech:
It's not originally for the CJ-5 but it could be modified to fit. Thanks
It's not originally for the CJ-5 but it could be modified to fit. Thanks
Can these be purchased or special ordered to be constructed of polished brass? If not, can you refer me to someone who may construct either the tandem or single hand operated wipers? Thanks
Willys Tech:
Sorry nobody makes this in brass. You would have to have that done locally.
Sorry nobody makes this in brass. You would have to have that done locally.
I purchased the manual tandum wiper assembly for my 1942 Willys. I may be missing parts. Should i have two bushings that slide over the screw assembly that bolts on other end of the windshield? That is what the unit pivots on and takes up the slop? If I am missing, do you sell those separately or do i have to buy the whole unit again?
Willys Tech:
There really are no bushings. This is a complete kit.
There really are no bushings. This is a complete kit.
Do you have replacement rubber wiper blades for these? Thanks
Willys Tech:
Sorry, we only have these in the complete kit. We do sell part number: 663367 wiper blade.
Sorry, we only have these in the complete kit. We do sell part number: 663367 wiper blade.
I have a 1945 HB with two separate manual wipers. will the tandem hand operated wiper work for me?
Willys Tech:
I think you mean MB. Yes it is for the vehicles listed above.
I think you mean MB. Yes it is for the vehicles listed above.
Will this work for my CJ2A?
Willys Tech:
These will work but really the CJ-2A used one vacuum wiper and one manual wiper. Both of which we sell.
These will work but really the CJ-2A used one vacuum wiper and one manual wiper. Both of which we sell.
Will they work on a 55 CJ3B
Willys Tech:
Im sure it could with some modification.
Im sure it could with some modification.
Do the tandem wiper kits require additional Parts (i.e. washers and/or rubber grommets). I'm installing on a 48 cj2a. Thanks
Willys Tech:
No they are pretty much ready to go.
No they are pretty much ready to go.
I have a 1946 CJ2a with electric wiper motors, will this set fit without any mods, if it needs a modification was would it be?
Willys Tech:
This should work just fine for your CJ-2A
This should work just fine for your CJ-2A
Will this work on a CJ3A?
Willys Tech:
Im sure it will with modification.
Im sure it will with modification.
who & where is it made, and quality compaired to origonal equipment?
Willys Tech:
They are S&S. These are comprable to original.
They are S&S. These are comprable to original.
how much modifications will i need to do to make this fit my m38a1
Willys Tech:
You are probably going to have to lengthen the shaft for a M38A1 between the two wipers.
You are probably going to have to lengthen the shaft for a M38A1 between the two wipers.
YOU MIGHT ALSO BE INTERESTED IN
