Product Videos
Questions & Answers
My windshield frame is already drilled for screws for the weather seal to frame cowl seal. Do the pre holes match the holes already in my frame?
Willys Jeep Parts Tech:
Yes they have holes drilled in the original locations.
Yes they have holes drilled in the original locations.
What size are the metal screws to install weather shield cowl to frame. Part # A2476
Willys Jeep Parts Tech:
Not sure what size you are needing to know. Please give us a call.
Not sure what size you are needing to know. Please give us a call.
I have a 1955 CJ-3B. Do you have a Weatherseal for the Frame to Cowl for the windshield frame?
Willys Jeep Parts Tech:
The correct seal for the 3B is 674234. Thanks
The correct seal for the 3B is 674234. Thanks
I purchased this part for my 1943 Ford GPW, and after installing it correctly I have a 1/4 - 1/2 inch gap between the cowl and the seal. Not sure what to do with that. Any suggestions?
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com We need to see some pictures of your windshield frame to help.
Email mike@kaiserwillys.com We need to see some pictures of your windshield frame to help.
Will this fit 1951 willys jeep
Willys Jeep Parts Tech:
674234 is the part number you need.
674234 is the part number you need.
I have a '47 CJ2A with a CJ3A windshield...is this the right seal or should I go with the CJ3A seal?
Willys Jeep Parts Tech:
No, you'll want to use this seal 674234. Thanks
No, you'll want to use this seal 674234. Thanks
Which direction does the flap go? Assuming it presses against the top of the tub, does the flap go forward (towards the engine) or rearward (towards the passenger)?
Willys Tech:
It will only go one way. The seal will curve with your windshield frame arms and I will have a recess for your screws to secure it in the bottom of the frame as well.
It will only go one way. The seal will curve with your windshield frame arms and I will have a recess for your screws to secure it in the bottom of the frame as well.
there are two brackets attached to my new windshield with thumbscrews. what are they for?
Willys Tech:
We would need to know your vehicle. Please call us toll free and we can help.
We would need to know your vehicle. Please call us toll free and we can help.
what screws do you use to attach to bottom of windshield? I am a customer.
Willys Tech:
A2475 is the part number for the hardware kit.
A2475 is the part number for the hardware kit.
do you have the screws that hold the seal on and are the holes in the seal counter sunk to fit them?
Willys Tech:
A2475 is the part number for the install kit.
A2475 is the part number for the install kit.
I have a 1955 dj3a willys jeep and I am wondering if this will fit in for the cowl seal
Willys Tech:
Yes this will fit for the DJ as well.
Yes this will fit for the DJ as well.
is this weatherstrip kind of square looking at each end ? cj3a
Willys Tech:
Yes that is correct.
Yes that is correct.
will this fit with cj3b-j4c 1961
Willys Tech:
Yes this is proper.
Yes this is proper.
is tis weatherstriping needed to have good tight fit on the cowl.
Willys Tech:
Yes that is correct. You need to have it or it would be metal on metal.
Yes that is correct. You need to have it or it would be metal on metal.
will this fit 1950 jeepster?
Willys Tech:
No this is for Jeeps only.
No this is for Jeeps only.
YOU MIGHT ALSO BE INTERESTED IN
