Steering Column Horn Contact Brush (Imported)
Fits 41-49 MB, GPW, CJ-2A
New Replacement Steering Column Horn Contact Brush (1 required per vehicle)
Mounts on your lower outer steering column to make contact to the inner horn bushing. For early style horns where the horn wire does not go thru the bottom of the steering gear box.
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
| Part # | Price |
|---|---|
| A302 | $12.99 MSRP: |
$12.99
MSRP:
Questions & Answers
Does this horn brush require removal of brass so the cover will sit down on the outer tube? I have replaced the horn contact bushing and horn button repair kit. Even though the hex on the brass is fully inserted into the plastic insulator, there is about 1/8 gap before the cover will sit down on the outer tube.
Willys Tech:
You take part number A302B and slide it down the shaft. Then A302 contact should hit the brass on the bushing. You sauder your wire then to the A302B. Make sure not to melt the rubber insulator.
You take part number A302B and slide it down the shaft. Then A302 contact should hit the brass on the bushing. You sauder your wire then to the A302B. Make sure not to melt the rubber insulator.
What is your current delivery time estimate? If I order now, can I possibly receive the overdrive kit in 4 weeks or less? thanks! Bob
Willys Jeep Parts Tech:
Yes, currently they are running a bit faster. Please call us toll free and we can help out.
Yes, currently they are running a bit faster. Please call us toll free and we can help out.
Does this come assembled as one unit
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
1972 CJ5 is my jeep. I need to replace the original. Outside tab has fallen off. Whar are the measurements of this item. The original piece is an 1.5 inches long with the holes 1 inch on center.
Willys Jeep Parts Tech:
2-1/8" center to center mounting.
2-1/8" center to center mounting.
What would be the proper gage wire to connect this to the horn relay on a 12-volt conversion?
Willys Tech:
I think it takes a 16 gauge wire but will have to confirm.
I think it takes a 16 gauge wire but will have to confirm.
Will this work with the Ross steering on a 66-71 CJ5?
Willys Tech:
Im sure it could be used just fine if you wanted.
Im sure it could be used just fine if you wanted.
Do you stock this item? Do you ship international?
Willys Tech:
Yes, we stock this item and ship daily USPS and UPS international.
Yes, we stock this item and ship daily USPS and UPS international.
YOU MIGHT ALSO BE INTERESTED IN
