Front Leaf Spring Assembly (8 leaf)
Fits 41-64 MB, GPW, CJ-2A, 3A, 3B, M38

Part # A612

New Replacement Front Leaf Spring Assembly (2 required per vehicle)

Replace those sagging springs with this direct replacement 8 leaf assembly. Measures 36-1/4" eye to eye. Guaranteed proper arc for your vehicle. Comes painted black. Will set you back to original stock height.

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
50-52 M38

Part #	Price
A612	$144.99 MSRP:

$144.99

MSRP:

Product Videos

Questions & Answers

Are these US made?

Willys Jeep Parts Tech:
Yes, that is correct.

I have a 1944 Willys MBT trailer. Are these the correct springs? I measured along the curve of the main spring and it measures 36 1/4 inches, center to center of the mounting holes.

Willys Jeep Parts Tech:
We do not sell these to fit the trailers, nor can we confirm. But we have had people purchase them for that reason.

What brand are these?

Willys Jeep Parts Tech:
We have a few different manufacturers for these.

What brand springs are they?

Willys Jeep Parts Tech:
1/4" fuel line

I have a1948 cj2 want to replace front springs would you help me get the correct part number, I would also like to get new unbolts and any hardware to do this thank you

Willys Jeep Parts Tech:
https://www.kaiserwillys.com/diagram/cj-2a-diagrams/suspension-diagrams-willys-cj-2a/front-spring-41-71-willys-jeep/front-spring-41-71-willys-jeep See link. We have it all!

I have a 1946 Bantam T3-C trailer and I understand that the front leaf springs from the CJ2A are the leaf springs I need. The 36 1/4" measurement is spot on as well as the 8 leafs. I am going to be mounting this on top of the axle to provide more lift. Are there bushings I will need for the new leaf springs? If so, which ones do you recommend? Thank you for your help.

Willys Jeep Parts Tech:
Yes, 802061/802062 and 384228/359039 are what you would need to mount.

We have a 42 GPW... The rears can go for a while but the fronts are pretty tired. What is the major difference between the MB and GPW springs?

Willys Jeep Parts Tech:
MB and GPW springs will interchange with each other.

I understand that new leafs will raise the vehicle 1-2", back to original height... however I'm looking to raise my '43 MB by 2-3" over original height. Which leafs (front and rear) would you recommend for that?

Willys Jeep Parts Tech:
If you do a true 2-3 inch lift you will have alot of driveline and steering issues to overcome. Please email mike@kaiserwillys.com and I can try to help out.

Hi, can you share an estimated shipping weight on this items? I need to order them to a local US address and then ship them overseas.

Willys Jeep Parts Tech:
They weight 33 pounds each.

Do these springs fit a 1942 Ford GPW and will they work in conjunction with the torque reaction spring assembly on the drivers side?

Willys Tech:
Yes these are proper for all the vehicles listed above and do accept the torque reaction spring too.

Are these springs 2 wide?

Willys Tech:
They are 1-3/4 like original

Does the pivot bushing come with springs ?

Willys Tech:
No, that is a separate item.

On the above item, #A612, which shackle kit would be the proper one for this leaf spring. Jeep is a 62 CJ3B.

Willys Tech:
The part number: 802061 or 802062 like original.

Are the front and rear springs the same on a 1947 cj2a willys?

Willys Tech:
No they are different. The rears are part number: A614

What is the stock part 8 or 10 leaf or what is recommended for a 47 cj 2a with a winch?

Willys Tech:
It is a 8 leaf. These are what I would go with on a CJ-2A.

Front Leaf Spring Assembly (8 leaf)
Fits 41-64 MB, GPW, CJ-2A, 3A, 3B, M38

Product Videos

Questions & Answers

Please Wait...