Product Videos
Questions & Answers
Is there 2-3/16 and 1 1/4 port ?
Willys Jeep Parts Tech:
That is correct.
That is correct.
Is there a fitting like this with 1/4" outlets for the rear lines?
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com your vehicle information and we can help out.
Email mike@kaiserwillys.com your vehicle information and we can help out.
Mike. I was just reading a question that was asked about a Tee fitting on the front right frame with 1/4'' steel on front side of Tee and a 3/16'' on bottom and back side of Tee. Where would I find such piece. Thanks for all your help.
Willys Jeep Parts Tech:
Please email us your vehicle information and we can help out.
Please email us your vehicle information and we can help out.
I'm looking for the tee connection that mounts to the right front frame that accepts the incoming 1/4" line coming from the master cylinder, and the (2) 3/16" lines going to the front right and back brakes. This is for a 62 wagon.
Willys Jeep Parts Tech:
That is used only. Email mike@kaiserwillys.com and we can point you in the right direction.
That is used only. Email mike@kaiserwillys.com and we can point you in the right direction.
I am restoring all the break system to an old beat up 1953 cj3a willys how many tee and washer do I need for the job
Willys Jeep Parts Tech:
It requires two of these per vehicle.
It requires two of these per vehicle.
I need to purchase item 637532 and the metal lines that go from this fitting to the rear wheels and also the rubber line that goes from this fitting to the frame mount where the metal line from the master cylinder will attach. is it possible to purchase just these items and if so what are the part or item numbers I need? oh yea I have a 46 CJ-2A
Willys Jeep Parts Tech:
If you can email mike@kaiserwillys.com and we can get more vehicle information and hopefully get you fixed up. Thanks!
If you can email mike@kaiserwillys.com and we can get more vehicle information and hopefully get you fixed up. Thanks!
Is this for 1 tee fitting, or do I need to order 2 pieces for a 47 CJ2A?
Willys Jeep Parts Tech:
You will need two of them. Thanks
You will need two of them. Thanks
I'm looking for the 4 way tee that mounts to the frame that accepts the 1/4 line from the single res. master cylinder, then splits off to the rear, drivers side front and then to pass. side front. 1967 CJ5 V6 10 brakes with s tubes
Willys Tech:
That is obtainable at a local Napa. We can get you good used if need be as well.
That is obtainable at a local Napa. We can get you good used if need be as well.
Does this connect the rubber hose and steel line together on the frame?
Willys Tech:
Yes thst is correct.
Yes thst is correct.
YOU MIGHT ALSO BE INTERESTED IN
