Product Videos
Questions & Answers
What are the thread sizes for each end of this fitting?
Willys Jeep Parts Tech:
1/8" NPT on male on one end and 1/4" tube inverted flare on female on the other. Thanks
1/8" NPT on male on one end and 1/4" tube inverted flare on female on the other. Thanks
Do y’all have the exact same product, but with a size 7/16? My fuel line fits a 7/16 and I can’t find another product that will work. If not any suggestions on what to do?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your vehicle information so we can try to help.
Please email mike@kaiserwillys.com your vehicle information so we can try to help.
What size is this fitting?
Willys Jeep Parts Tech:
These are 1/4 fitting.
These are 1/4 fitting.
Does this connect yo the engine block and can be connected to the oil sensor gauge Item # 800807?
Willys Jeep Parts Tech:
800807 screws directly in to the block. A215C is for your flexible fuel hose to hook up to when you have a pressure style gauge.
800807 screws directly in to the block. A215C is for your flexible fuel hose to hook up to when you have a pressure style gauge.
I need the 90 degree oil inlet fitting that goes next to the fuel pump on an m38a1 or cj5. Will this work?
Willys Jeep Parts Tech:
A215 and A218 are the corresponding part numbers.
A215 and A218 are the corresponding part numbers.
can i use this 90 degree fitting - to connect the oilline-tube from the oilfilter to the engine-block of the L226-1956 wagon engine?
Willys Jeep Parts Tech:
Yes, I do believe this fitting would work in the application but will have to check.
Yes, I do believe this fitting would work in the application but will have to check.
Is this the fitting for the oil pressure gauge, or for the oil pressure supply to the filter or both?
Willys Tech:
The A-1198-ST is what goes to the back of your oil pressure gauge on a MB/CJ-2A,3A, ect. This would be to your block for your inlet hose to go to from the oil filter.
The A-1198-ST is what goes to the back of your oil pressure gauge on a MB/CJ-2A,3A, ect. This would be to your block for your inlet hose to go to from the oil filter.
YOU MIGHT ALSO BE INTERESTED IN
