Questions & Answers
I believe that there should be a felt packer between the toe board and chassis ? Is that correct ? If so what would I use there ? Do you have a hardware Kit available for MBWillys ? Cheers John
Willys Jeep Parts Tech:
A4416 is what I typically use there. This padding kit will cover it too.
A4416 is what I typically use there. This padding kit will cover it too.
Which body mount would I use between the rear bumper and the body?
Willys Jeep Parts Tech:
These 1/4" pads are typically used.
These 1/4" pads are typically used.
Do you have a diagram that shows the locations of where the body mounts should go? My jeep is so old I'm sure none of the current body mounts are original. The set has 12 pads. But i I am coming up with something like 6 or 8 obvious locations. Also do you have a radiator mount picture? It appears from othter sources that this requres two rubber bushings.
Willys Jeep Parts Tech:
Please call and ask for Mike M. I can walk you thru it. Thanks!
Please call and ask for Mike M. I can walk you thru it. Thanks!
I had another place sell me a mounting kit for a new CJ5 Body. They provided 10 bolts, nuts, large washers, lock washers and 10 round rubber bushings that are 5/8' thick. They look like mini hockey pucks. When I took off the original rusty body, I see only 7 mounting points. Some of he points have a much thinner rubber pads like these 1/4' pads. What is correct and how may mounting points should there be? I have a 1963 CJ5.
Willys Jeep Parts Tech:
I would be wary, Its probably the universal kit they are selling. They really are not right for your vehicle. The A4420 would be proper...
I would be wary, Its probably the universal kit they are selling. They really are not right for your vehicle. The A4420 would be proper...
what are the dimensions and hole size please.
Willys Jeep Parts Tech:
3"x1-1/2" and 3/4" on center hole
3"x1-1/2" and 3/4" on center hole
Do you carry the round rubber mount that goes between the radiator core support and the frame?
Willys Jeep Parts Tech:
We have several options on. Typically we sell 965888 part number.
We have several options on. Typically we sell 965888 part number.
Good morning, I plan on installing an M31 machine gun mount in the back of my MB. Is it advisable to put 4 of these between the body and the plate on the frame? Thanks.
Willys Tech:
I think you should be able to with no problem.
I think you should be able to with no problem.
YOU MIGHT ALSO BE INTERESTED IN
