Front Axle Shaft Joint Adjusting Shim Drive Flange Gasket (.060 thick)
Fits 41-71 Jeep & Willys with Dana 25/27
(Out of Stock)
Universal Joint Adjusting Shim in .060 thickness
Proper front axle shaft joint adjusting shim. Used between the wheel hub and the drive flange that slides over the end of the splines on your axle shaft. These were often used from the factory.
Application:
Dana 25 front
Dana 27 front
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
| Part # | Price |
|---|---|
| A862 | $9.99 MSRP: |
$9.99
MSRP:
Questions & Answers
how do you check if shim is needed or correct thickness . Cheers John
Willys Jeep Parts Tech:
Your axle end play.
Your axle end play.
How do I check the backlash
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com and I can send you a write up about it. Thanks!
Email mike@kaiserwillys.com and I can send you a write up about it. Thanks!
How do I know if I need the shim or not?
Willys Jeep Parts Tech:
Check your front axle backlash to confirm.
Check your front axle backlash to confirm.
What material is this made of? The picture appears to be a steel shim attached to a gasket.
Willys Jeep Parts Tech:
This is made up of hard gasket material. There is not steel attached to it. Thanks!!
This is made up of hard gasket material. There is not steel attached to it. Thanks!!
YOU MIGHT ALSO BE INTERESTED IN
