Product Videos
Questions & Answers
What is the bolt pattern? Looking for a 11” x 2” brake drum with 5 by 4.75 bolt pattern.
Willys Jeep Parts Tech:
These are like all the other Willys. 5x5.5
These are like all the other Willys. 5x5.5
I have a 1957 jeep pickup with a dana 27 front axle, will these drums fit on the front?
Willys Jeep Parts Tech:
Yes, the truck would have had 11" brakes originally.
Yes, the truck would have had 11" brakes originally.
Will these brake drums really fit the FC170 4w got some others and center hole to big for hub 1962 FC170 SW Thank you
Willys Jeep Parts Tech:
Yes, the FC had 11" brakes originally so these drums will work for that application. Thanks
Yes, the FC had 11" brakes originally so these drums will work for that application. Thanks
I have a 46 CJ-2A that has 11" x 2 1/4" brake drums,on the rear, they were changed in the 70's. would this drum fit & have the same bolt pattern?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com a picture of your brake set up and we can ID for you.
Please email mike@kaiserwillys.com a picture of your brake set up and we can ID for you.
I have a 1959 Jeep wagon and I am trying to remove the drums off the rear end, without success. Noticed that the drums have the axle bolts coming thru a center section on the outside of the drum making the drum completely solid looks like a cover plate. Looking at what the diagram for new drums shows completely a different looking drum. I backed off the adjusters on the back side but the drum will not come off is their something else I need to do.
Willys Tech:
The hub and drum are pressed together with the studs.
The hub and drum are pressed together with the studs.
I am upgrading a cj3b to 11 inch drum brakes. My backing plate is off a 62 wagon. But my 3 " high drum does not cover the shoes completely, leaving a 1/2 inch exposed. Will this drum fit over the shoes? This drum appears to be the same as the one I already have.
Willys Jeep Parts Tech:
Make sure you have your hub mounted on the outside of the drum if you have TR/SW 11" brakes and you should be all set. Its most likely why you have the gap. The hub is being mounted backwards.
Make sure you have your hub mounted on the outside of the drum if you have TR/SW 11" brakes and you should be all set. Its most likely why you have the gap. The hub is being mounted backwards.
I am converting the front brakes on my CJ2A to 11". I've pulled 11" brakes { backing plates, drums, etc. } from a Willys pickup truck. The bolt pattern on the drums are different than the bolt pattern on my hubs. Do you have 11" drums to fit my standard CJ2A front hubs ?
Willys Jeep Parts Tech:
I would just need to know what the 11" brakes are off of and we can help. Email mike@kaiserwillys.com
I would just need to know what the 11" brakes are off of and we can help. Email mike@kaiserwillys.com
the common 11" drum fits inside hub. I have one that fits outside. how do I find more of this type
Willys Jeep Parts Tech:
On this drum for the Willys Truck and Station Wagon the hub always mounts on the outside.
On this drum for the Willys Truck and Station Wagon the hub always mounts on the outside.
will this drum fit on a 1957 jeep fc150? Thanks
Willys Jeep Parts Tech:
Yes, these are for the FC-150 and FC-170 Willys too.
Yes, these are for the FC-150 and FC-170 Willys too.
My 11" drums are on the back side of my hubs on my wagon, are these the correct ones? Somehow the picture doesn't look quite right... If not what do I need?
Willys Jeep Parts Tech:
The hubs mount on the outside of the drum.
The hubs mount on the outside of the drum.
Im wondering if these are the same for the 64 Wagoneer ...
Willy Tech:
Sorry, I do not believe they are the same.
Sorry, I do not believe they are the same.
hello Will the brake backing plate &parts fit from a clamshell a rear to a dana ?? thanks chris
Willys Tech:
The Timken rear and and Dana 53 used the same 11 brake set up.
The Timken rear and and Dana 53 used the same 11 brake set up.
do these drums need to be turned & trued, or are they already machine & ready to use?
Willys Tech:
They are new and don't need to be machined. However anytime you mount a new hub to a brake drum you will want to make sure it is on there centered so its not a bad idea to have it checked out.
They are new and don't need to be machined. However anytime you mount a new hub to a brake drum you will want to make sure it is on there centered so its not a bad idea to have it checked out.
Will these front drums work on a 1950 pickup 2 wheel drive?
Willys Tech:
Yes, they use the same 11 drums.
Yes, they use the same 11 drums.
Will this hub fit the front of my 1949 Willys Overland Pickup? Does the hub have to be pressed out of the old one? Thanks!
Willys Tech:
This drum will fit your Willys Truck yes. You have to press your old hub on and off.
This drum will fit your Willys Truck yes. You have to press your old hub on and off.
I have a 50 wagon with 4wd. My drums on the front have the hub for the locker as all in one. Is there something I am missing or is that how it should be
Willys Tech:
Your hubs and drums are pressed together with your studs. This is how is was done originally. They can be pressed apart and pressed back together with a hydraulic press.
Your hubs and drums are pressed together with your studs. This is how is was done originally. They can be pressed apart and pressed back together with a hydraulic press.
does this come with the back plate?
Willys Tech:
This is the brake drum only. The hub and backing plates are separate items.
This is the brake drum only. The hub and backing plates are separate items.
I'm buying the disc conversion for the front..are disc brakes also optional for the rear or do I have to buy original 11 drums for my 51 willys truck
Willys Tech:
For the Willys Truck you'll have to stick to drum rear brakes. We have all the parts to make it like brand new for your rear 11 drums too.
For the Willys Truck you'll have to stick to drum rear brakes. We have all the parts to make it like brand new for your rear 11 drums too.
what is the bolt pattern on this drum?
Willys Tech:
They are 5 x 5.5 just like original
They are 5 x 5.5 just like original
I have a 1958 FC 170 and want to know if this drum will work and can it be used on the front or rear axal?
Willys Tech:
Yes this is the proper drum for front and rear.
Yes this is the proper drum for front and rear.
YOU MIGHT ALSO BE INTERESTED IN
