Questions & Answers
I purchased these for my 1951 Willys wagon but the clips don't fit. It seems the time is slightly too wide and the grooves for the clips don't line up. Do you have any tips?
Willys Jeep Parts Tech:
Email mike@Kaiserwillys.com to help out.
Email mike@Kaiserwillys.com to help out.
does this u joint work for the front drive shaft on a 1951 wagon with the strap that has 2 bolts?
Willys Jeep Parts Tech:
This is what people use it as a replacement for.
This is what people use it as a replacement for.
My 48 Truck has a split seat in the front. I am a little confused. Are these the same frames as a station wagon, and are the seat covers interchangeable? Small seat on the passenger side?
Willys Jeep Parts Tech:
The Truck takes a different set. See part number: COVER-4WD
The Truck takes a different set. See part number: COVER-4WD
Do you have the bolts and plates that hold the u-joint in place in the yoke?
Willys Jeep Parts Tech:
Those you have to reuse your originals or we can help salvage yard.
Those you have to reuse your originals or we can help salvage yard.
Looking for pinion yoke and u-joint for Timken 51540 rear end, any ideas?
Willys Jeep Parts Tech:
The yoke is good used. Please email mike@kaiserwillys.com and we can help.
The yoke is good used. Please email mike@kaiserwillys.com and we can help.
What are the dimensions of this universal joint?
Willys Jeep Parts Tech:
3" x 3" Caps 1-1/8"
3" x 3" Caps 1-1/8"
Having a problem finding u-joints for 1960 cj5, rear shaft , Cleveland style , front joint measures ,.938" cap dia. With a 3.25" cross , rear joint two caps measure .938" and two measure 1.062" with same cross dims.. Both are internally clipped.
Willys Jeep Parts Tech:
They didnt use that style joint on a 1960 CJ-5. Please call and ask for Mike M. and i can try to help you ID what you need.
They didnt use that style joint on a 1960 CJ-5. Please call and ask for Mike M. and i can try to help you ID what you need.
FYI Your pictures are not of a Cleveland type joint.
Willys Jeep Parts Tech:
Yes, we know. This style joint pictures will replace the Cleveland style. Thanks!
Yes, we know. This style joint pictures will replace the Cleveland style. Thanks!
Hi Mike, are these the u-joints I need for my 55 wagon? Mine has a steel plate about an inch long that goes over the caps and held in place with a single bolt.
Willys Tech:
Yes that is correct. If you have the lock strap and bolt style.
Yes that is correct. If you have the lock strap and bolt style.
Do these U joints swap out the original strap and groove cup style u-joints that are on a 1954 pickup with timken rear end and L226 motor?
Willys Tech:
Yes these are direct replacement joints for the lock strap and bolt style joint.
Yes these are direct replacement joints for the lock strap and bolt style joint.
What keeps the caps from falling out?
Willys Tech:
The lock strap.
The lock strap.
