Questions & Answers
I’m pretty sure you had before felt pads that went on the pedal shaft on the interior side to quieten the pedals as being pressed to the floor. Am I correct and if so how do I find them??
Willys Jeep Parts Tech:
Nothing above the body for pads. Only below.
Nothing above the body for pads. Only below.
I'm sorry to be dense here, but when you answered "How do these install? Are the pedals assembly and come apart somewhere?" Are the items to be installed on the engine side of the firewall or the driver's side?. Thanks
Willys Jeep Parts Tech:
They install on the firewall side and cover the hole in the floor board from the backside when the pedal is not being depressed. It stacks spring, washer then seal to the back of the floor board.
They install on the firewall side and cover the hole in the floor board from the backside when the pedal is not being depressed. It stacks spring, washer then seal to the back of the floor board.
Hi, I just installed this kit in my 1951 CJ3A and the rubber grommet touches the oil pressure gauge flexible line. Am I missing anything? Thanks.
Willys Jeep Parts Tech:
Please send some photos to mike@kaiserwillys.com so we can help assess what your issue may be.
Please send some photos to mike@kaiserwillys.com so we can help assess what your issue may be.
Can you give me the diameter of the rubber? Want to make sure it will fit in my 68 CJ5.
Willys Jeep Parts Tech:
2.5" OD on the rubber.
2.5" OD on the rubber.
How do these install? Are the pedals assembly and come apart somewhere?
Willys Jeep Parts Tech:
You just pull the shank off the arm. The items install on the backside of the firewall. It goes rubber pad, metal washer then spring.
You just pull the shank off the arm. The items install on the backside of the firewall. It goes rubber pad, metal washer then spring.
Is there a grommet for the hole in the bell housing for the clutch fork.?
Willys Tech:
They really are not necessary. Some people make them but the bottom of your bellhousing typically has a drain hole.
They really are not necessary. Some people make them but the bottom of your bellhousing typically has a drain hole.
Will this seal and draft kit work on the clutch pedal on a 59 wagon
Willys Tech:
You want part number: 802743 for a Willys Station Wagon.
You want part number: 802743 for a Willys Station Wagon.
Do these go on the bottom of the tub with the rubber touching the tub and the spring on the opposite side of the washer?
Willys Tech:
Yes that is corrrect.
Yes that is corrrect.
Do you have this part for a 1971 CJ5?
Willys Tech:
Please call us toll free. I have to ask you a few question.
Please call us toll free. I have to ask you a few question.
YOU MIGHT ALSO BE INTERESTED IN
