Product Videos
Questions & Answers
will this fit my m38a1 or do i need to chamge other parts also
Willys Jeep Parts Tech:
Only if you are the 9.25" diameter clutch. If your 8.5" you have to stick with that. They are not interchangeable.
Only if you are the 9.25" diameter clutch. If your 8.5" you have to stick with that. They are not interchangeable.
Which side goes toward the flywheel?
Willys Jeep Parts Tech:
The protruding side of the center hub goes away from the flywheel. It really can only be installed one way to mount flush.
The protruding side of the center hub goes away from the flywheel. It really can only be installed one way to mount flush.
I have a '64 CJ-5 with an F-134. My friction disc measures 9 1/4", bu only has 3 springs, whereas this has six. Is this the right part?
Willys Jeep Parts Tech:
Yes, this will be the correct one for you.
Yes, this will be the correct one for you.
Hi there. How wide is the friction surface? I am converting my 3B to a GM 151 and I would like to use the stock pressure plate, but need a clutch with at least 3" of friction surface. Thanks.
Willys Jeep Parts Tech:
3" would be really thick. Call me toll free. I'll see what we can do.
3" would be really thick. Call me toll free. I'll see what we can do.
Can I replace my original 8 1/2" friction plate & pressure plate with a 9 1/4" heavy duty clutch in my 1965 cj-5 , 134cid & t-90 thank you in advance.
Willys Jeep Parts Tech:
They really are not interchangeable with each other.
They really are not interchangeable with each other.
Can you please confirm for me that the spline size for Omix Ada part number 921977 is infact 1.125"X10spline? This disk will be used in a custom application so I want to make sure before I buy, thanks , Simon wolf
Willys Jeep Parts Tech:
Yes, that is the correct measurements for the part.
Yes, that is the correct measurements for the part.
YOU MIGHT ALSO BE INTERESTED IN
