Product Videos
Questions & Answers
Will this work in my cj6 special long of 54? If not, you have this emergency hand brake can and handle for this vehicle? Thanks
Willys Tech:
The CJ-5/6 used a T-handle set up. I dont think this will work for you. The T-handle ones are only available good used.
The CJ-5/6 used a T-handle set up. I dont think this will work for you. The T-handle ones are only available good used.
will this work with my cj3b 1961, and how about the cable to connect to the lever.
Willys Tech:
It will probabaly work but the ball may be a bit small on the 3B.
It will probabaly work but the ball may be a bit small on the 3B.
do you guys also sell the felt padding that sit on the pivot studs
Willys Tech:
A176 is the part number.
A176 is the part number.
i own a 1965 cj5.. im looking for the hand brake with cable.. do you have it??
Willys Tech:
That is part number: 906750 We can get good used on the cane shaft.
That is part number: 906750 We can get good used on the cane shaft.
I ordered two of these springs; however, I don't see anyway for two springs to fit into the clutch release bell crank. There's clearly enough room in one end of the shaft, but the cotter pin holes on the other end are too close to the end for the spring and the clutch stud to fit in. I also have an old repair manual that shows only 1 spring. Please advise how both springs are supposed to fit in.
Willys Tech:
The one spring is compressed pretty far so that everything is tight.
The one spring is compressed pretty far so that everything is tight.
will this work on my 1961 cj5
Willys Tech:
CJ-5 originally used a T-handle syle end.
CJ-5 originally used a T-handle syle end.
Will the emergency brake handle work on a 59 Willys pickup?
Willys Tech:
This is for M38A1 only. We can get you good used for your Willys Truck.
This is for M38A1 only. We can get you good used for your Willys Truck.
My E-brake cable has a ball end. Will this hand brake handle fit it?
Willys Tech:
Yes that is correct.
Yes that is correct.
Do you have an emergency brake handle for the CJ2A or CJ3A?
Willys Tech:
Sure. Please call me toll free. Can you also try part number: A351
Sure. Please call me toll free. Can you also try part number: A351
My 55 M38A1 has a ratcheting pull handle on the floor between the seats that pulls straight up. It appears original. Which one is correct? The linkage between the handle and emergency brake are gone and I can not make the vertical linkage/handle pull the horizontal brake effectively.
Willys Tech:
This is the correct one pictured.
This is the correct one pictured.
YOU MIGHT ALSO BE INTERESTED IN
