Save 10% off site-wide. Use code NEWYR10 Exclusions apply.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Complete Formed Steel Fuel Line Kit (Imported)
Fits 46-49 CJ-2A

Part # MS01200

New Replacement Pre-Formed Steel Fuel Line Kit.

Save yourself days of headache trying to make your own lines up. This kit will do the trick.

Does entire fuel system with pre-flared double inverted ends. Just like original!! Goes from gas tank to fuel pump & fuel pump to W-O carburetor.

This kit comes with the 2 hard lines, fuel flex hose, fittings and clamps

The long steel line measures at 49".

The long steel line goes from the fuel tank to the rubber line. Rubber line goes to the fuel pump. The small steel line goes from the fuel pump to the carburetor.

1 required per vehicle.

Helpful Guides and Illustrations:
Fuel Tank Exploded View

Fits:
46-49 CJ-2A
49-53 CJ-3A (with single action fuel pump only)

Part # Price
MS01200

$50.99

MSRP:

$50.99

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

looking for the formed steel line for the cj3b with dual action pump

Willys Jeep Parts Tech:
See part number: MS01203

I have an old fuel tank without a bung to connect this outgoing fuel line. What fitting do I need?

Willys Jeep Parts Tech:
These take a 1/4" fuel line originally.

will the part# MS01200 fuel line fit a 1950 jeep CJ3a

Willys Jeep Parts Tech:
As long as you have a single action fuel pump.

What is the line size for both tank to pump and from pump to carb Thank you

Willys Jeep Parts Tech:
I do believe its 1/4" fuel line. Thanks!

Just brought fuel kit for cj2a. Fuel line was bend to put in box for shipping . Does not look like pictures

Willys Jeep Parts Tech:
That is how they come from the supplier. Give us a call and we can help you, though.

Is there a break in the line for a in line filter, or do you have to cut it?

Willys Jeep Parts Tech:
They didnt originally use one so you would have to add.

will this fuel line work on a solex carb? from fuel pump to the solex carb

Willys Jeep Parts Tech:
You would just have to tweak the line to fit.

Do you have a diagram available that shows how the fuel line from the tank to the fuel pump on a 47 CJ is supposed to run?

Willys Jeep Parts Tech:
Runs along the frame rail. Email mike@kaiserwillys.com with any questions.

Hi, I have a question regarding this kit, what is the flex fuel hose used for? The steel line runs form the fuel tank to the fuel pump and then from the fuel pump to the carb.

Willys Jeep Parts Tech:
That between your fuel pump and the line from your tank. It goes to the pump and the line from your tank screws to it.

WIll this Fuel Line Kit work with the Plastic Fuel Tank (MTS-005), where the fuel line hook up is on the top of the tank? Will it be long enough?

Willys Jeep Parts Tech:
This fuel line kit is for the original tanks. If you have the poly tank, you would just have to modify to fit upto the aftermarket tank.

I ordered and received the fuel line. In order to fit in the box, the fuel line was bent almost 180 degrees. Is this how the fuel line is normally shipped? Am I supposed to unbend the tubing? It certainly doesn't look like the picture depicting an almost straight line. If this is not how I was to receive it, may I please return it and get an unbent fuel line? Thank you in advance

Willys Jeep Parts Tech:
Yes, the supplier puts a swooping bend in them for shipping purposes. It just needs to be hand bend back out. If you have any trouble let us know but you shouldnt have any issues.

What is the diameter of the hard line: 1/4", 5/16", or 3/8"?

Willys Jeep Parts Tech:
The diameter is 1/4". Thanks

Before I order this I need to repair the threads on the tank. What is the thread size on the female tank side so I can use the correct tap size?

Willys Jeep Parts Tech:
They are a 1/4 fuel line line fitting.

I have a 1948 cj2a with two gas tanks, one under each seat do you have a steel line set up for this? and how does set up work ?

Willys Jeep Parts Tech:
We do have it for the drivers side but the passenger side you will have to fabricate on your end.

Does this kit (MS01200) comes with the flex hose and 90 degree fittings that are shown in the image along with the steel lines?

Willys Jeep Parts Tech:
Yes, it will come with what is in the photos shown.

will this fit a 49 jeepster?

Willys Jeep Parts Tech:
No, I'm sorry this is just for the CJ-2A. No one makes a fuel line kit for the Jeepster. You'll have to go locally, buy the preformed lines and bend them to fit. Thanks

Can I get just the line from pump to carburetor?

Willys Tech:
Sorry, these only come in as a kit.

does it come with the flex hose from the frame tube to the fuel pump ?

Willys Tech:
This is the steel line kit only. We do sell the flex line separately.

Hello. I am putting together a basket case 47 CJ2A with an F Head. Assuming I will just need to make my own lines, correct? Thanks,

Willys Tech:
Yes if you have an unoriginal engine.

I have a 47 willy's CJ2A that I replaced the hard lines from the fuel tank to the pump and carburetor with 1/4 fuel hose. I did this after removing the gas tank and having it cleaned due to being rusted and causing clogged up line problems. Is the fuel hose O.K. to use or will it suck together when gas is being pumped to the carb? I'm still having problems with it not getting enough gas to the pump and don't know if it's still a clogged up issue or if the fuel hose is sucking together.

Willys Tech:
Fuel hose is usually fine. It is designed typically to be trouble free and not do that.

Will this also fit a 1951 CJ3A?

Willys Tech:
Yes these will fit the CJ-3A as well with minor bending.

Will this work with the Solex carburetor?

Willys Tech:
Yes this should work just fine.

what thread size is male tank fitting on 48 CJ2A. I need to get a tap and die to chase the threads which are nicked but not bad.

Willys Tech:
Its takes a 1/4 fuel line on the outlet just like original.

Do you have a kit like this for a 1950 Willy's Jeepster with the F-head 4?

Willys Tech:
You have to go up to your local NAPA. They sell predetermined length preflared lines. You can just bend from there.

I need a fuel line for my 63 willys pickup, where can I get one of them?

Willys Tech:
I would make it. Your local NAPA sells predetermined lengh preflared steel line that can be bent to shape.

Do you have fuel lines for cj2a with replacement plastic tank with fuel outlet on top of the tank?

Willys Tech:
Yes, please give us a call and we can go over the options. Thanks

is it commen for the fuel system to vaper lock if fuel lines are not ran properly

Willys Tech:
Only if you are running it too close to a heat source.

Do you have these lines for a CJ3A?

Willys Tech:
This is the closest kit available for it.

do you offer this complete formed steel line kit for a 1953 cj-3b.

Willys Tech:
No, that is not being reproduced anywhere. You have to make this. Your local NAPA sells preformed preflared steel line in various lengths. You can hand bend it or use a tool.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message