Questions & Answers
Would this be the correct kit for the 1952 through 1954 Aero Willys sedan line? I have a Hurricane 6-161 engine. Much appreciated!
Willys Jeep Parts Tech:
A Willys Aero passenger car you would have to make your own lines.
A Willys Aero passenger car you would have to make your own lines.
Mike, I bought the complete set and damaged the compression fitting on the line from the carburetor to the fuel pump; all the others are OK. Can you sell me this line only? Gary
Willys Jeep Parts Tech:
We should have just the fitting. Email mike@Kaiserwillys.com to help.
We should have just the fitting. Email mike@Kaiserwillys.com to help.
I have a 1952 M38 with an F head. Can this kit be modified to include the correct line from the fuel pump to the carburetor?
Willys Jeep Parts Tech:
You would have to bend the line to fit given its unoriginal on the vehicle.
You would have to bend the line to fit given its unoriginal on the vehicle.
I have a 48 CJ2A but it has a tub and tank from an 50 or 51 M38 on it. All of the drivetrain is stock CJ2A, I would assume that I would need the CJ2A set of fuel lines?
Willys Jeep Parts Tech:
Yes, but you may have to modify a bit at the tank end depending on how the line is landing given the unoriginal set up.
Yes, but you may have to modify a bit at the tank end depending on how the line is landing given the unoriginal set up.
I bought the fuel line kit but am a little lost on where all of the lines and fittings go, is there a diagram for this kit? Thanks!
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can email you some images.
Please email mike@kaiserwillys.com and we can email you some images.
I purchased this kit, but didn't have any original system to match up where they go. My jeep came in pieces with a lot of components missing. Do you have a diagram to show where the individual parts in this kit go?
Willys Jeep Parts Tech:
Please call us toll free and we can walk you thru it.
Please call us toll free and we can walk you thru it.
Hi - I installed the preformed fuel lines and they worked perfectly. (M38) Unfortunately I broke one of the straight brass fittings that attaches the preformed line to the 3 way port (at the fuel shut off valve). I can't seem to find a replacement on the site. Please let me know how I can find it. Thanks.
Willys Jeep Parts Tech:
Please call us toll free. We can help you out.
Please call us toll free. We can help you out.
I have a '52 CJ3A. I did not see steel line kit for it, will this one work?
Willys Tech:
This is for M38 only. Try part number: MS01200
This is for M38 only. Try part number: MS01200