Questions & Answers
can I buy just the seals and gaskets for the front and rear axles? I don't need shims or bearings just gaskets and seals.
Willys Jeep Parts Tech:
Sure! We have it individually online or you can call us toll free and we can help.
Sure! We have it individually online or you can call us toll free and we can help.
Would this be the same kit for a 66 scout 800 dana 27 front
Willys Jeep Parts Tech:
Unfortunately, I have no way to confirm that.
Unfortunately, I have no way to confirm that.
how do I confirm what dana front and rear end I have on my 1967 Kaiser Jeepster 6 cylinder auto trans ?
Willys Jeep Parts Tech:
The best way to check is by looking on the pumpkin/housing itself. It is typically stamped on the passenger side. Another way would be, check the wheel bearings; if they have the letters "LM" listed then it is a Dana 27 axle. Thanks
The best way to check is by looking on the pumpkin/housing itself. It is typically stamped on the passenger side. Another way would be, check the wheel bearings; if they have the letters "LM" listed then it is a Dana 27 axle. Thanks
bolender what lubeicant is used for dana27af
Willys Tech:
We typically use a 90 weight non synthetic.
We typically use a 90 weight non synthetic.
I have a 67 jeepster convertible with a dauntless v-6. What would be the correct axle kits for that vehicle?
Willys Tech:
Yes as long as you have the Dana 27 front end.
Yes as long as you have the Dana 27 front end.
I have a 1970 CJ-5 with Dauntless 225 V6, T14A 3-speed transmission, and Dana T18 Transfer case (single stick). I'm planning on a complete restoration. How can I tell which axle I have to make sure this is the right overhaul kit?
Willys Tech:
You should have Dana 27 front and Dana 44 rear end. This is the correct one for you you.
You should have Dana 27 front and Dana 44 rear end. This is the correct one for you you.