Product Videos
Questions & Answers
I realize I'm reaching here, but, do you have something that might fit the front axle on my '72 Wagoneer, with a closed-knuckle Dana 30/35?
Willys Jeep Parts Tech:
We may. Email mike@kaiserwillys.com to help out.
We may. Email mike@kaiserwillys.com to help out.
i have a 1967 CJ5 that i want to put this disk brake kit on it . what what break booster do i need ?
Willys Jeep Parts Tech:
376896 is the dual reservoir master cylinder kit you would need.
376896 is the dual reservoir master cylinder kit you would need.
What's is the size of the disc brake. i ordered this kit yeas back and lost the paperwork that gave me the parts list and im looking to replace my front disc's
Willys Jeep Parts Tech.:
Rotors: 11-5/8"
Rotors: 11-5/8"
Will aftermarket 15" wheel fit after install?
Willys Jeep Parts Tech:
Most aftermarket rims they make nowadays do clear disc brakes. Worse case you just use a thin wheel spacer.
Most aftermarket rims they make nowadays do clear disc brakes. Worse case you just use a thin wheel spacer.
Will Part # 376895 work on the straight axle on a 51 two wheel drive truck?
Willys Jeep Parts Tech:
These are for 4WD vehicles only.
These are for 4WD vehicles only.
Will teh 16 inch rims you sell clear this kit? I installed the disk convertion last fall but never tried to put the rims/tires back on until today and there is no way the stock 15 inch ones will fit. Unless I swap out lugs and use a spacer but not a big fan of spacers. Heard too many horror stories. Just glad I did not buy new tires for the rims i currently have! Thanks in advance,
Willys Jeep Parts Tech:
We recommend using aftermarket rims with our disc conversion kits. There will be some grinding that would be necessary if you use original rims. But the best way is to go with aftermarket rims.
We recommend using aftermarket rims with our disc conversion kits. There will be some grinding that would be necessary if you use original rims. But the best way is to go with aftermarket rims.
When converting over to disc brakes, both front and back. What brake line kit do you convert to?
Willys Jeep Parts Tech:
The lines youll have to modify / make to port to each wheel.
The lines youll have to modify / make to port to each wheel.
Hi, with the complete front disc brake kit item # 376895 , do we have to change the original master cylinder? thx
Willys Jeep Parts Tech:
Yes, youll need to go to a dual reservoir master cylinder with adjustable proportioning valve. We have a kit for you as well.
Yes, youll need to go to a dual reservoir master cylinder with adjustable proportioning valve. We have a kit for you as well.
I installed this front disc conversion on my 1957 CJ 5 and I was wondering if the left side was supposed to have left hand lug bolts and nuts. I am noticing that my rear drum brakes have left handed threads and require left handed lug nuts.
Willys Jeep Parts Tech:
Some people convert to all RH thread and some will stay LH and RH set ups.
Some people convert to all RH thread and some will stay LH and RH set ups.
hey i need brakes 1965 jeep fj6a fleet van dont care if its just shoes our will these conversion kits work?????? please help asap
Willys Jeep Parts Tech:
Sorry, these are for 4x4 vehicles only. Email mike@kaiserwillys.com to help.
Sorry, these are for 4x4 vehicles only. Email mike@kaiserwillys.com to help.
I have a '66 CJ5. After installing your kit, should I be installing a adjustable proportioning valve?
Willys Jeep Parts Tech:
Anytime you go with disc brakes, you will need a dual master cylinder with a proportioning valve.
Anytime you go with disc brakes, you will need a dual master cylinder with a proportioning valve.
Can the round dust guards that bolt on just begin the hub be purchased separately? These are the cup like ones that on the outside of the caliper bracket ? Mine are not in good shape and I would like to replace ? Thanks .
Willys Jeep Parts Tech:
We should be ab le to if you got the kit from us on this.
We should be ab le to if you got the kit from us on this.
Do the bearings have to be pressed in? If so, do you have a recommended wheel bearing press?
Willys Jeep Parts Tech:
You need to make sure to evenly seat them on install.
You need to make sure to evenly seat them on install.
Will this kit fit a 1957 FC-150
Willys Jeep Parts Tech:
As long as you have the Dana 25 front end it will.
As long as you have the Dana 25 front end it will.
what master cylinder do you recommend to use with this kit
Willys Jeep Parts Tech:
376896 or 376897 depending on vehicle.
376896 or 376897 depending on vehicle.
I have a 1965 CJ5A Tuxedo Park and was wondering if I can use the steel rims?
Willys Jeep Parts Tech:
You may just have to use a small wheel spacer if any clearance issues.
You may just have to use a small wheel spacer if any clearance issues.
I have 1956 Jeep CJ5 and I want to do front disc brake conversion will my current wheels and original wheels?
Willys Jeep Parts Tech:
You will most likely have to go to an aftermarket rim or just use a small wheel spacer.
You will most likely have to go to an aftermarket rim or just use a small wheel spacer.
I purchased both front and rear disc brake kits for 51 Wagon. I want to use stock 16" steel wheels. Will 1.25" spacers (part 11302) work for both front and rear discs to fit stock wheels? Also, will rear wheels have clearance for fenders with a 1.25" spacer? Thank You
Willys Jeep Parts Tech:
Yes, those spacers will be more than enough to clear it and work for you.
Yes, those spacers will be more than enough to clear it and work for you.
I have a 48 Cj2a. After reading all the questions and answers about wheels and spacers - can I use my original wheels with a spacer? And do you sell the spacer? About how much farther will the wheel be out with spacer.
Willys Jeep Parts Tech:
Yes, you can use your original wheels with a spacer for these kits. You just need to clear the caliper.
Yes, you can use your original wheels with a spacer for these kits. You just need to clear the caliper.
M y 58 m38a1 has disc (bought that way) but I have a high hard pedal any Ideas??
Willys Jeep Parts Tech:
You may need to adjust the proportioning valve assuming that someone installed one on your vehicle.
You may need to adjust the proportioning valve assuming that someone installed one on your vehicle.
Well, can't use the original wheels with the disk brake upgrade. Calipers hit the rim. Two questions: (a) can you recommend an after-market wheel that will work with the new brakes? and (b) If I put spacers on the front wheels I have to put spacers on the back wheels as well, no? Any issue with the rear wheels rubbing the fender? Thanks
Willys Jeep Parts Tech:
Any aftermarket rim they make would work because they will clear disc brakes. Make sure they are flush mount. You need to be able to clear Rotors: 11-5/8" and have a back spacing of 1/2" - 5/8". Make sure your center hole is 4.25" to clear the hub.
Any aftermarket rim they make would work because they will clear disc brakes. Make sure they are flush mount. You need to be able to clear Rotors: 11-5/8" and have a back spacing of 1/2" - 5/8". Make sure your center hole is 4.25" to clear the hub.
Will this kit work on a 1964 J200 Gladiator with a closed knuckle Dana 44 with 5x 5.5 bolt pattern?
Willys Jeep Parts Tech:
I believe so but please email mike@kaiserwillys.com to confirm.
I believe so but please email mike@kaiserwillys.com to confirm.
Will any aftermarket steel rim work with your disc brake conversion. Looking at 6" by 16". Thanks, J.
Willys Jeep Parts Tech:
Yes, any aftermarket rim will work with 5x5.5 4.25" center that is flush mount back. Thanks
Yes, any aftermarket rim will work with 5x5.5 4.25" center that is flush mount back. Thanks
Hello I am getting ready to work on a Friend's 1969 Kaiser Jeep DJ5 with a locked up 4 cylinder and 2 speed automatic transmission. This is 2wd and I wanted to know if you offer a disc brake conversion and a dual reservoir master cylinder for this vehicle ? Thank You Mark
Willys Jeep Parts Tech:
Sorry not for that 2x4 set up.
Sorry not for that 2x4 set up.
Are all wheel studs right hand thread
Willys Jeep Parts Tech:
Yes, the disc kits they are.
Yes, the disc kits they are.
I have a 47 2T truck. It is 2wd. , I need a frt disc brake conversion kit, what do I do ?? Thanks..
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we may be able to help.
Please email mike@kaiserwillys.com and we may be able to help.
i have a 48 cj3a and want to put front disc on it will your kit work and what master cyclinder do i need?
Willys Jeep Parts Tech:
For your CJ-2A/3A this is the proper kit and the dual reservoir kit you need is part number: 376896
For your CJ-2A/3A this is the proper kit and the dual reservoir kit you need is part number: 376896
Will this fit my 1964 fc170? Thank you
Willys Jeep Parts Tech:
Yes, as long as you have a Dana 25 front end.
Yes, as long as you have a Dana 25 front end.
If I need to buy replacement parts such as discs and or rotors. Where can I get them?
Willys Jeep Parts Tech:
We can provide for you and help. Please email mike@kaiserwillys.com or call us toll free. Thanks!
We can provide for you and help. Please email mike@kaiserwillys.com or call us toll free. Thanks!
Is this M38 cushion for one cushion or two. At $84 I would assume two but please verify
Willys Jeep Parts Tech:
These are each. These are USA made hand stitched and high quality material.
These are each. These are USA made hand stitched and high quality material.
can this kit be adapted to a dana 30 in a 74 cj6 cheers ian
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can get more information on your vehicle and help out.
Please email mike@kaiserwillys.com and we can get more information on your vehicle and help out.
Hi, I’m probably asking the obvious, but want to be sure before I order. I have 1956 CJ-6, ser# 157. Is this and 376896 what I need to do the complete front disc conversion? I have after market 16” steel wheels. Thank you
Willys Jeep Parts Tech:
Yes, this front disc kit would fit your CJ-5.
Yes, this front disc kit would fit your CJ-5.
Are the wheel bearings in this kit the same as what came on the drum setup?
Willys Jeep Parts Tech:
No, they wheel bearings are different. They are provided in kit.
No, they wheel bearings are different. They are provided in kit.
What is the weight of the disc brake conversion kit? Can you ship is two smaller packages? Regards Randel
Willys Jeep Parts Tech:
These go in 2 package and they weight 32 and 52 pounds each. 13x13x13 for the 52 pound box 13x13x5 for the 32 pound box
These go in 2 package and they weight 32 and 52 pounds each. 13x13x13 for the 52 pound box 13x13x5 for the 32 pound box
On the Disc Brake Kit for my M38, when you say oversize rims, what size do you recommend in order to use my standard military tires? Thanks!!
Willys Jeep Parts Tech:
Your original rims may not clear the disc brakes. So any aftermarket rim that is flush mount with same bolt pattern as original will work. All rims they make now a days clear disc brakes.
Your original rims may not clear the disc brakes. So any aftermarket rim that is flush mount with same bolt pattern as original will work. All rims they make now a days clear disc brakes.
Do you have a disc brake kit for a 1949 willys jeepster?
Willys Jeep Parts Tech:
Sorry, no one makes a disc brake conversion kit for the Willys Jeepster 2x4.
Sorry, no one makes a disc brake conversion kit for the Willys Jeepster 2x4.
Do we have to source a different backing plate or cut the old drum one? There are no notes about the backing plate other than in the photo, but it isn't part of the kit.
Willys Jeep Parts Tech:
Your old backing plate isnt used in the kit.
Your old backing plate isnt used in the kit.
can I get a full circle caliper bracket 1960 p/u truck thanks chris
Willys Jeep Parts Tech:
We should be able to help you. Give us a call toll free at 888-648-4923. Thanks
We should be able to help you. Give us a call toll free at 888-648-4923. Thanks
Will this kit fit on a 1966 jeep gladiator , dana 44 front, 5 x 5.5 pattern
Willys Jeep Parts Tech:
Yes, this should mount up. Email mike@kaiserwillys.com and we can confirm for you as well.
Yes, this should mount up. Email mike@kaiserwillys.com and we can confirm for you as well.
I have a 1952 M38A1, if I use these can I use a wheel spacer or something so I can use the original rims?
Willys Jeep Parts Tech:
Yes, alot of times a wheel spacer will get you the clearance you need, just depends on the style rim you have.
Yes, alot of times a wheel spacer will get you the clearance you need, just depends on the style rim you have.
Do you sell any of the listed parts individually?
Willys Jeep Parts Tech:
Typically no, But email mike@kaiserwillys.com and i can see what i can do for you. Thanks!
Typically no, But email mike@kaiserwillys.com and i can see what i can do for you. Thanks!
Will this work on a 1965 j-200 willys kaiser jeeptruck
Willys Jeep Parts Tech:
Yes, please call us toll free and we can go over details for you.
Yes, please call us toll free and we can go over details for you.
Do you have any photos of where the proportioning valve is installed?
Willys Jeep Parts Tech:
You can put it anywhere inline that is free of heat. Typically people mount on the frame and line it in.
You can put it anywhere inline that is free of heat. Typically people mount on the frame and line it in.
will i need to change the master cylinder also ,it has a vacumn boosted single circuit drum brake system its a 6-230
Willys Jeep Parts Tech:
It is a good idea to change the master cylinder when switching to disc brakes. If you have a CJ then this is the correct part - 376896. If you have a Truck/Station Wagon then this is the correct part - 376897. Thanks
It is a good idea to change the master cylinder when switching to disc brakes. If you have a CJ then this is the correct part - 376896. If you have a Truck/Station Wagon then this is the correct part - 376897. Thanks
After installation, what size rotors and pads would you need for maintenance? Are they the same as another vehicle or do they have to be special ordered?
Willys Jeep Parts Tech:
We can get you replacement pads/rotors if need be for the kit.
We can get you replacement pads/rotors if need be for the kit.
Looking disc brake conversion kit for 2wd 48 willys overland? Any suggestion?
Willys Jeep Parts Tech:
Sorry, one does not exist for the Jeepster or 2x4 Station Wagon. We do have booster kit part number: 805200
Sorry, one does not exist for the Jeepster or 2x4 Station Wagon. We do have booster kit part number: 805200
Will this kit fit CJ3 truck 1951 2WD beam front axle which was available in Australia? What type of master cylinder and booster are needed. Also total cost including shipping to Sydney Australia? Thanks Dave
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com some images of your vehicle and let us take a look. Thanks!
Please email mike@kaiserwillys.com some images of your vehicle and let us take a look. Thanks!
will this fit a 74 cj6
Willys Jeep Parts Tech:
Please call us toll free. I may be able to help with this.
Please call us toll free. I may be able to help with this.
Hi plz could u tell me how much to send to Durban !
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your full shipping address and I can quote you out. Thanks!
Please email mike@kaiserwillys.com your full shipping address and I can quote you out. Thanks!
Will this fit on an FC150 wide track? I believe the truck has a CJ frame under it so I don't see why it wouldn't fit. Thanks!
Willys Jeep Parts Tech:
Yes, I do believe it will. Please call us toll free and we can go over details on.
Yes, I do believe it will. Please call us toll free and we can go over details on.
Is a booster available for the front disk brake and dual master cylinder conversion? If not, what will render better stopping, 4 drums with a booster or front disks without booster? I have a stock '63 CJ5 with stock rims and locking hubs. Will I have any problems with fit?
Willys Jeep Parts Tech:
I don't know of a booster that works with disc brakes that we sell. Our booster kit requires drum brakes. We do off front and rear disc brakes or the booster kit but I really just depends what all you want to get into changing on your Willys.
I don't know of a booster that works with disc brakes that we sell. Our booster kit requires drum brakes. We do off front and rear disc brakes or the booster kit but I really just depends what all you want to get into changing on your Willys.
Will this kit work with WWII combat rims?
Willys Jeep Parts Tech:
You may have a clearance issue with the rims. You may have to use a wheel spacer.
You may have a clearance issue with the rims. You may have to use a wheel spacer.
Will this kit work on my 1963 Wagoner?
Willys Jeep Parts Tech:
I have never tried to install on a Wagoneer frame.
I have never tried to install on a Wagoneer frame.
Hi, Can I install it just front only or do I have to put rear conversion ,too? I have 1952 cj2.
Willys Jeep Parts Tech:
Yes, you can change to disc brakes in the front and keep drum brakes in the rear. Thanks
Yes, you can change to disc brakes in the front and keep drum brakes in the rear. Thanks
the discount also applies to the front disc brake conversion kits for willys mb
Willys Jeep Parts Tech:
Yes, that is in the brake section as well. Thanks!
Yes, that is in the brake section as well. Thanks!
Is there a disc brake conversion available for a 2 wheel drive 1948 pickup?
Willys Jeep Parts Tech:
Sorry they are only available for the 4WD Willys.
Sorry they are only available for the 4WD Willys.
will this kit work on a closed knuckle dana 44
Willys Jeep Parts Tech:
This is for Dana 25/27 front ends only.
This is for Dana 25/27 front ends only.
I have ordered the Master cylinder for this kit and planed to order the brake conversion kit right up until I seen on a couple posts that the rims may have to be changed I have an early addition 46 CJ2A serial 27441 with 16' rims. Are these rims going to work? I really do not want to change the rims, its not a cost thing its an authenticity thing. I am only changing the brakes for safety reasons the rest of the jeep will be stock.
Willys Jeep Parts Tech:
You will have to get aftermarket rims or use spacers.
You will have to get aftermarket rims or use spacers.
am installing a front disc brake conversion kit on a 55 CJ, purchased the kit from you along with master cylinder. Do i need to add a proportioning valve? is this not supplied in kit? retaining the rear drum brakes.
Willys Jeep Parts Tech:
The proportioning valve comes with the disc dual reservoir master cylinder kits we sell. Please call us toll free. We can try to help you out.
The proportioning valve comes with the disc dual reservoir master cylinder kits we sell. Please call us toll free. We can try to help you out.
Hi I am after dic break conversions for a Dana 25 and Dana 44 for my 3b, do you send parts to Brisbane Australia, I understand that there is extra cost, can you quote me total cost including transport. I will pay before sending pay pal credit card or bank transfer or what is best for you. Looking forward to a reply. Ken
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thanks!
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thanks!
Im looking for a rear disc brake conversion kit for my dj5 jeep any recommendations.
Willys Jeep Parts Tech:
Sorry, I don't believe anyone makes a kit for the DJ.
Sorry, I don't believe anyone makes a kit for the DJ.
WILL THESE FIR MY 1955 WILLY'S?
Willys Jeep Parts Tech:
Yes, as long as you have one of the vehicles listed above.
Yes, as long as you have one of the vehicles listed above.
Will this kit fit a 1970 wagoneer? And will it fit 1978 wagoneer they are both full size not grand wagoneer
Willys Jeep Parts Tech:
Sorry, I do not believe so.
Sorry, I do not believe so.
Will this work on a 1950 Jeep FC 170 with the Spicer 44F front axle ?
Willys Tech:
I have not ever installed it on this front end. Please call us toll free and we can see what we can do to get you fixed up.
I have not ever installed it on this front end. Please call us toll free and we can see what we can do to get you fixed up.
I have mitsubishi 4dr5 j24. Is this kit fit for my jeep?
Willys Tech:
I have not tried to fit one of these up to that vehicle.
I have not tried to fit one of these up to that vehicle.
Do have better directions for the installation of the kit other than the ones on you website and the ones that come with the kit? Thanks
Willys Tech:
See links above. It gives photos and everything of install. If you have any additional questions call us toll free and we can put you in touch with manufacture.
See links above. It gives photos and everything of install. If you have any additional questions call us toll free and we can put you in touch with manufacture.
Does one need a vaccuum booster for this conversion? Or will it just be standard brakes like my drum brakes are currently. Thanks for your time
Willys Tech:
No vacuum booster is needed.
No vacuum booster is needed.
Does this work for any dana 27? Will it work with warn hub locks?
Willys Tech:
Yes, this is for a Dana 27 front end. It does not effect the Warn lockouts.
Yes, this is for a Dana 27 front end. It does not effect the Warn lockouts.
Will this kit fit 1952 willys aerowing?
Willys Tech:
Sorry, these are for 4WD vehicles only.
Sorry, these are for 4WD vehicles only.
I have a stock 1953 Willys PU with 16 stock wheels, will disc brakes work on this application?
Willys Tech:
Yes they will work for the Willys Truck. However you may have to go to an aftermarket rim.
Yes they will work for the Willys Truck. However you may have to go to an aftermarket rim.
I have stock 15 wheels, would upgrading to stock 16 wheels guarantee the disk conversion to fit better? or is it more of a back spacing issue? Thank you for your time
Willys Tech:
You may have to go to an aftermarket rim that has clearance for disc brakes if you have either 15 or 16 brakes.
You may have to go to an aftermarket rim that has clearance for disc brakes if you have either 15 or 16 brakes.
How can you tell the differance from a Dana 44 and 27or 25 front axle
Willys Tech:
They will be stamped. You can also look at the cover gaskets we sell to tell the difference in shape.
They will be stamped. You can also look at the cover gaskets we sell to tell the difference in shape.
I have the original 15 rim and there seems to be quite a bit of interference with the calipers. If I go with aftermarket rims, will 16 rims work as well?
Willys Tech:
Any aftermarket rim they make nowadays has clearance for disc brakes typically.
Any aftermarket rim they make nowadays has clearance for disc brakes typically.
will this kit work with a 71 Jeepster commando? V-6 engine.
Willys Tech:
Yes as long as your are 4WD.
Yes as long as your are 4WD.
How do you account for 15 stock wheels (welded) rubbing caliper? So much so it will not engage lugs. Are spacers required?
Willys Tech:
On some original style rims you may have to go to aftermarket rims for clearance.
On some original style rims you may have to go to aftermarket rims for clearance.
Will this kit work with a 1967 jeep cj5 3.7 225 dauntless engine? what is the cost of all parts needed to do the complete conversion?
Willys Tech:
Yes this will work for a 1967 CJ-5. It fits all the vehicles listed above. I would also recomment getting part number: 376896 for that vehicle.
Yes this will work for a 1967 CJ-5. It fits all the vehicles listed above. I would also recomment getting part number: 376896 for that vehicle.
Is the wheel lug pattern the same between the disk conversion in the front vs. the drums in the back?
Willys Tech:
They are the same 5 x 5.5
They are the same 5 x 5.5
Hello, I was wondering if this kit would fit on a 1955 Willys pickup 4WD? I also have no idea on how to check what axle it has so if you know that would be helpful. Thanks.
Willys Tech:
Yes this is the proper kit. You have a Dana 25 front end.
Yes this is the proper kit. You have a Dana 25 front end.
My CJ-2A Disk Brake conversion came the other day. Looks great! I have the shop manual and on page 188 Fig 217 as shown, I have removed the Axle Shaft Flange. What is the next step to get the front drums removed? Thanks, Peer.
Willys Tech:
You will need part number: A692 socket to remove both sets of spindle nuts. Once those are off everything will just slide off.
You will need part number: A692 socket to remove both sets of spindle nuts. Once those are off everything will just slide off.
I have a 57 FC170 will kit work for me?
Willys Tech:
Yes it will work just fine. They will work for the Willys FC's as well.
Yes it will work just fine. They will work for the Willys FC's as well.
My 1964 CJ5 has the stock 9 drums. With this kit, is it necessary to upgrade the rear brakes too, or will it work OK with just the front disc conversion? Thanks.
Willys Tech:
You can do just the front if you like. We also have rear kits too if you want to upgrade that. It is entirely up to you.
You can do just the front if you like. We also have rear kits too if you want to upgrade that. It is entirely up to you.
Do you have a front and rear drum to disk conversion kit(s) for a 1970 CJ6?
Willys Tech:
Yes you will have a Dana 27 front end. It will work.
Yes you will have a Dana 27 front end. It will work.
I have a 56 6-226 4wd Pkup. I want to do BOTH front and rear disc conversions. Do you have a rear conversion kit yet? If so: If I install a rear disc kit as well, what is the new emergency brake apparatus?
Willys Tech:
Yes we have the rear kits too. Please call us toll free. I can go over the details.
Yes we have the rear kits too. Please call us toll free. I can go over the details.
Also---should I order new break lines as well?
Willys Tech:
I would make new lines. We have all the flex lines available.
I would make new lines. We have all the flex lines available.
How about including the C-101 applications?
Willys Tech:
Yes, this will work for Jeepster Commandos as well.
Yes, this will work for Jeepster Commandos as well.
Will this conversion kit allow the use of stock 16 wheels on a 1950 CJ3A? and can replacement Master Cylinder be mounted onto frame rail allowing for stock pedal location?
Willys Tech:
Yes your stock wheels will work fine with this. Yes the master cylinder is designed to work with the stock pedal.
Yes your stock wheels will work fine with this. Yes the master cylinder is designed to work with the stock pedal.
do you sell a rear disc conversion kit? for 1953cj3b
Willys Tech:
This is for front only. We can get you fixed up with all new parts for your rear drums.
This is for front only. We can get you fixed up with all new parts for your rear drums.
I have a 1962 Willy's panel truck with a straight axle 2 wheel drive...Will the front disc kit fit or is it just for four wheel drive....I'm looking for something that fits...
Willys Tech:
These are for 4WD vehicles only
These are for 4WD vehicles only
Will this work on 1966 jeep commando(Jeepsteer)?
Willys Tech:
It should as long as you have a Dana 25 or Dana 27 front end.
It should as long as you have a Dana 25 or Dana 27 front end.
What master cylinder are you using ?
Willys Tech:
You want to use a master cylinder specific for disc brakes. We sell a kit try part numbers: 376896 or 376897 depending on your Willys. However we do have customers that use a standard master cylinder with little problem but we recomment the disc one and proportioning valve.
You want to use a master cylinder specific for disc brakes. We sell a kit try part numbers: 376896 or 376897 depending on your Willys. However we do have customers that use a standard master cylinder with little problem but we recomment the disc one and proportioning valve.
i have the stock steel 15 wheels on a '61 6-226 with Warn hubs that i would like to keep. will spacers be required to clear the rotors/calipers? are aftermarket rims required like in some other kits? will the Warn hubs present a problem with the kit? thanks.
Willys Tech:
You should be all set on this. Occationlly you have to do alittle grinding on the backside of your rim for clearance if you are 15 but really you shouldnt have any problems. This kit is very straight forward and easy to install.
You should be all set on this. Occationlly you have to do alittle grinding on the backside of your rim for clearance if you are 15 but really you shouldnt have any problems. This kit is very straight forward and easy to install.
Disc brake conversion kit for 48-51 jeepster 2 wheel drive??
Willys Tech:
This kit is for 4WD vehicles only.
This kit is for 4WD vehicles only.
Will this fit a DANA model 27 front axle? Do you have and upgrade option for stainless braid brake hoses with the kit?
Willys Tech:
Yes it will work fine for Dana 27. On the lines this is something you would have to match up locally.
Yes it will work fine for Dana 27. On the lines this is something you would have to match up locally.
I see this kit is for 46 year and newer is there a kit for a 42 military mb willy's if so where can I read about it and is it a easy change over?
Willys Tech:
This kit will work for 41-45 MB/GPW as well.
This kit will work for 41-45 MB/GPW as well.
YOU MIGHT ALSO BE INTERESTED IN
