Product Videos
Questions & Answers
Will I need to purchase new hubs and studs with this kit or can I reuse the existing ones?
Willys Jeep Parts Tech:
Its a good idea to re place the studs. Usually hubs are still good.
Its a good idea to re place the studs. Usually hubs are still good.
I have a 63 wagon will these brakes work. Also where are the brakes manufactured
Willys Jeep Parts Tech:
Yes, this is proper for 46-64 Willys Station Wagon with the 11x2" brakes.
Yes, this is proper for 46-64 Willys Station Wagon with the 11x2" brakes.
i have a 1962 willyys wagon - is this the part i need to order?? thanks,
Willys Jeep Parts Tech:
Yes, this is for a Willys Station Wagon.
Yes, this is for a Willys Station Wagon.
I have a 21964 CJ 3B and I want to upgrade to 11" drums in the rear (going to do disc conversion on the front). Do you sell a kit for the rear only? Also, I assume I need to swap out the backing plate to a larger diameter?
Willys Jeep Parts Tech:
We can get you 11" brake backing plates and get Willys Truck or Station Wagon brake set up. Call me toll free and we can help you out. Thanks!
We can get you 11" brake backing plates and get Willys Truck or Station Wagon brake set up. Call me toll free and we can help you out. Thanks!
I have a '54 4x4 wagon, L6-226.....9" brakes, would this kit be a complete "upgrade kit" to 11" ? (keeping in mind I'm not afraid to dig in and figure stuff out, but I'm no brake dude.....especially drum brakes). I'd like to have everything I'd need in front of me when I do it. Quite honestly I'm looking at a complete "bolt on" upgrade kit from Willys Jeep Parts, but it's fully twice your guys' price. Thanks
Willys Jeep Parts Tech:
You should be 11" brakes on your vehicle originally. Please call me toll free or email mike@kaiserwillys.com and we can ID what you have going on and help out. Thanks!
You should be 11" brakes on your vehicle originally. Please call me toll free or email mike@kaiserwillys.com and we can ID what you have going on and help out. Thanks!
I have 1955 M38A1 that want to convert to 11" drum. Backing plates I have are off 1954 Willy's wagon 4wd. Here is how I see the order. Part # BRAKE SW, and #924000 hardware kit, both of which fit wagon. Hoses #800950, and brake line kit MS00103, both fit M38A1. Does this look correct and applicable. Thanks
Willys Jeep Parts Tech:
Call us toll free and we can can confirm all this. Your steel lines would require just a bit of tweaking for the 11" set up. Thanks!
Call us toll free and we can can confirm all this. Your steel lines would require just a bit of tweaking for the 11" set up. Thanks!
I have a 1964 4x4 Station Wagon with 6-230. Will this kit work and can you direct me to good information on how to pull backing plates?
Willys Jeep Parts Tech:
You should still have the 11x2 brakes on that so yes it will. There really is no reason to pull the backing plates though...Please call us toll free and we can help you. Thanks!
You should still have the 11x2 brakes on that so yes it will. There really is no reason to pull the backing plates though...Please call us toll free and we can help you. Thanks!
will this kit work for 56 Station Wagon 4x4 with 226?
Willys Jeep Parts Tech:
Yes, this is the proper kit for you.
Yes, this is the proper kit for you.
Does the 11 Station Wagon Kit come with backing plates?
Willys Tech:
It comes with everything shown in the picture. We can get you good used backing plates.
It comes with everything shown in the picture. We can get you good used backing plates.
I have an original CJ3B. Can I upgrade from the standard 9 inch drums by using this kit? Do I need to buy anything else? Are there any clearance issues?
Willys Tech:
You will need new backing plates which we can help with. Please call us toll free.
You will need new backing plates which we can help with. Please call us toll free.
Can the dual master cylinder kit be ordered with this kit instead of the regular master cylinder
Willys Tech:
Yes, Please call us toll free.
Yes, Please call us toll free.
