Product Videos
Questions & Answers
Does this come with the pushrod for the master cylinder? If not how do I get the old one out of my M38a1?
Willys Jeep Parts Tech:
Pushrod is separate. Just remove the cotter pin and they come out. See part number: 647606
Pushrod is separate. Just remove the cotter pin and they come out. See part number: 647606
Does this kit work on a 1953 CJ3A?
Willys Jeep Parts Tech:
This will fit the vehicles above. If it fit your 3A, then your 3A has been modified to the brakes of one of the above vehicles.
This will fit the vehicles above. If it fit your 3A, then your 3A has been modified to the brakes of one of the above vehicles.
I was watching a You Tube video from Roy Works Garage about doing the brakes and he was using a 12 Ton Puller that he said he got from your company. Do you have this? Second question on the Seven Bar Salvage You Tube site he used a socket to remove the nuts inside the hub. Do you sell that socket?
Willys Jeep Parts Tech:
I have not seen the video but we do offer several pullers. If your looking for a rear hub puller is part number: HP600 and the spindle nut socket is part number: A692
I have not seen the video but we do offer several pullers. If your looking for a rear hub puller is part number: HP600 and the spindle nut socket is part number: A692
Is the master cylinder a dual-chamber type, and if not, can it be swapped in for a charge? Or, can I get everything in this kit EXCEPT the master cylinder?
Willys Jeep Parts Tech:
We can modify the kit for you no problem. They are single reservoir originally. Please call us toll free and we can help you out.
We can modify the kit for you no problem. They are single reservoir originally. Please call us toll free and we can help you out.
Does this Brake fit a jeep willy 1959 3JB.
Willys Jeep Parts Tech:
Yes, this kit is for a CJ-3B.
Yes, this kit is for a CJ-3B.
Do you have the backing plate for the brakes?
Willys Jeep Parts Tech:
We can get these good used. Please call us toll free.
We can get these good used. Please call us toll free.
Where do you take the measurement from to determine the size of the drums? I have a 1952 M38A1 but the drums are almost 9 3/4 inches at the outermost circumference.
Willys Jeep Parts Tech:
You measure inside the drum, machine surface to machines surface for the size.
You measure inside the drum, machine surface to machines surface for the size.
Do the drums with this kit come with the log studs?
Willys Tech:
The studs are a separate item.
The studs are a separate item.
I purchased and installed the disc conversion kit for the front axel, so I need a drum overhaul kit just from the read axel. Do you sell a kit with only two drums?
Willys Tech:
We can help build a rear kit only. Please call us toll free.
We can help build a rear kit only. Please call us toll free.
Do the Drums in the Kit come Slotted for the Feeler Gage adjustment
Willys Tech:
Nobody makes a drum that has these slots anymore. They really are not necessary and the shoes can be adjusted by jacking up each wheel and spinning.
Nobody makes a drum that has these slots anymore. They really are not necessary and the shoes can be adjusted by jacking up each wheel and spinning.
Does this kit come with installation instructions or any kind of list / guide?
Willys Tech:
We do sell complete mechanics manuals that go thru everything. They are listed under the 'Literature' category and will help with the entire vehicle.
We do sell complete mechanics manuals that go thru everything. They are listed under the 'Literature' category and will help with the entire vehicle.
Does this kit include brake shoe hold down pins and springs?
Willys Tech:
We have them too. They are part number: 120239
We have them too. They are part number: 120239
what's the best tires for my m38a1
Willys Tech:
We can help out with that. Please call us toll free. We have all the parts for you.
We can help out with that. Please call us toll free. We have all the parts for you.
YOU MIGHT ALSO BE INTERESTED IN
