Complete Speedometer Assembly and Gauge Kit (12 Volt)
Fits 46-66 CJ-2A, 3A, 3B, M38, M38A1

I often have to drive at night. Do the gauges come with lights?

Can you get these with a 12v Meter instead of the Amp Meter?

Where are your gauges made?

Be the first to answer this question.

I bought a gage kit from you last year and my speedometer is stuck at 40 mph . my odometor is still working . Is there any way to fix this?

How many ohms does the fuel gauge have?

I have a 56 M38A1 that has a 292 chevy straight 6. How long is the sending unit cabling?

CAN YOU CHANGE THE BULB COLOR IN THE CJ2A GUAGES

I have a 1953 Willis truck with the rectangle shaped gauges. Are these available or better yet "fixable"?

Are the bezels removeable so they can be painted, or powder coated?

Do you have a matching volt meter for kit # 640766?

Which Oil Pressure line kit is designed for use with the gauge in this kit ?

My 48 CJ2A has been converted to 12v and I am using a 1 wire alternator set up. Will this ammeter work with this set up? Or is there a different gauge for voltage

Do these gages have back lighting?

I have a 1965 CJ5 that I would like to use the military dash on. Would the sending units for oil pressure and temp need to be changed for an F-134 engine? Mine runs an alternator, would the ammeter have anything to connect to? It can fill in a spot on the dash if there isn't a viable connection.

I am running an aftermarket fuel tank with a sending unit that has a range of 0-90 ohms. Will this fuel gauge be compatible with my sending unit?

Does the oil pressure gauge have a sending unit or is a oil line connected to the gauge from the block

What are the ohms for the fuel guage for emty and full?

I had to replace the dash. But the only hole the dash came with was the speedometer and ignition. I have two other smaller gauges to install and would you know the standard hole sizes for the smaller gauges?

I have a Cj3b with a v6 cly different axels will the gauge set still work with what I have?

I just got this kit. Trying to figure out the Oil Pressure gauge, Looks like its a for a tube style. I have a 45' CJ2A with a 64' Buick 25 V6 and the sending unit in that is a wire style. Any ideas how I can get it to work or is there another part number to consider?

Do the gages come with installation instructions? My CJ-3A has been jury rigged for wiring and under the dash is a train wreck. Before I rip it out, I’ll want to have the right information in hand.

i have a 1959 willys cj3b what are the proper guages for this model currently it has a speedometer with fuel and temp but also seperate oil temp and amp guages

Does this kit also include the floor boot and required hardware for the floor boot install?

I have a couple questions. My M38A1 is converted to 12 volt. I noticed mention of a dashlight, the M38A1 has windows in the gauge to allow the external light to shine in gauge. Do these have the windows? Does the temp gauge have the sensor that goes into th engine block as well, or do I need a 12 volt temp sensor? Finally, is it an electrical oil pressure gauge or mechanical, if electrical, what oil pressure sensor do I need?

does the fuel gauge come with the sending unit?

Will these gauges fit a 1943 MB that has been converted to 12 volt.

My question is regarding the temperature and oil pressure guages. I would like to replace my all in one cj5 gauge with this set, will these guages work with the cj5 12v sensors?

are these the original style gauges?

Hello! My M38 is 24 volt. Will any of these guages work? Do you have a 24 volt kit? Steve

I have a cj3b (viasa,with a 4.192 perkins) with a "all in one" speedometer. I want to install the 5 gauges kit. do I need a speedometer cabe or the one that is attached is ok? also, my speedometer is in Km/H and i want the kit with Mph. suggestions? thanks

Hi, do you have the speedometer in Km instead of MPH?

Hello, wanted to ask if this complete speedometer and gauge kit will fit perfect in my willys 45 MB if not where can I get the complete set I want all five gauges speedometer, amp meter gauge, fuel gauge, oil gauge, temperature gauge. And want my shipment to be delivered to india how much will it cost. Thank you!!

Does the part number: MSPEEDO work for this speedometer with an M38 as well?

I recently purchased the speedometer and gauge kit 12 volt # 640766 for my M38a1 jeep i need rthe speedometer cable will the speedocable fit on the speedometer in the kit or can i order 643797 and will that cable fit on both ends

I converted my CJ2a to 12 volts using the conversion alternator and starter purchased from you. My question is, can I use the ammeter from this set. I want all the gauges to look the same. I received a gauge with the conversion with instruction to use it instead of the original gauges.

Does this gauges have a backlight

Does this kit come with everything needed for the speedometer to operate? Is the speedometer cable included? Thanks.

Do u have a gauge set for the 1953 Willis overland

Can you supply this assembly with speedo that has trip meter?

Will these fit in an M38A1? It has been converted from 24V to 12V, but they didn't change the gauges.

if i don't need the ammeter gauge will that take the price down a bit?

do the gages come with individual lights for each gage, or does the illumination of the gage dependent on a separate light mounted on the dash shining down on the gages thank you

How are these gauges lighted ie MB style or m37-38 style? thanks

Does this kit come with the fuel tank sending unit? Thanks.

does this include the snap ring for the end of the main shaft where it goes in front of the schro hub?