Product Videos
Questions & Answers
The metal bottom seat pans r 4 spring cushions? Don't need pans for plywood bottomed foam cushions? Thanks Rick
Willys Jeep Parts Tech:
If you have a metal pan already then you dont need the plywood pan.
If you have a metal pan already then you dont need the plywood pan.
Does this seat have the welded nut in the back tube that mounts it to the wheelhouse?
Willys Jeep Parts Tech:
No, you just need to run a bolt thru if you want to.
No, you just need to run a bolt thru if you want to.
I have a '47 CJ2/a. with no drivers seat. Is this seat correct for my Jeep. Your pic shows the front left leg is bent inward. Some other web sites show that left front leg straight down. Just want to know which is the right one?
Willys Jeep Parts Tech:
I think the picture is just a bit funny. This fits in all CJ-2A's.
I think the picture is just a bit funny. This fits in all CJ-2A's.
I have this seat frame in good shape from my 1946 2a. I also have the springs with the bottom pan, what looks like a horse hair pad and then foam. Is there a cover that will fit over all of this or should I be ordering a replacement foam seat pad and use plywood for the bottom? I'm not hung up on it being original, we still use this jeep for doing real work. I need same for passengers side. Thanks Ben 207 272 5723
Willys Jeep Parts Tech:
We have alot of options for you. We can make a plywood pan to replace your metal pan, if your metal pan has upholstery hooks then we can do a draw sting style. Please email pics to mike@kaiserwillys.com to help.
We have alot of options for you. We can make a plywood pan to replace your metal pan, if your metal pan has upholstery hooks then we can do a draw sting style. Please email pics to mike@kaiserwillys.com to help.
I have a 47 willies. I am 6 ' 1'' and 295#. The drivers seat is too close to the steering wheel. Do you make a narrow profile seat back that woiuld allow more room for driver. The wheel pan will not allow seat to move back. Or do you make a smaller diameter steering wheel that would give more room for driver?
Willys Tech:
You could possibly modify this frame to fit in there.
You could possibly modify this frame to fit in there.
I have a 1945 CJ-2A. Most parts are reused from left over MB parts. Will this seat fit or do I need a MB seat?
Willys Jeep Parts Tech:
This seat would work for you just fine. You should just make sure you have part number: REARBRKT on your CJ2A as well.
This seat would work for you just fine. You should just make sure you have part number: REARBRKT on your CJ2A as well.
Are the springs for the seats available?
Willys Jeep Parts Tech:
We do a complete seat cover and cushion set. See our canvas section or call us toll free and we can help you out.
We do a complete seat cover and cushion set. See our canvas section or call us toll free and we can help you out.
I just purchased a 1946 CJ 2A serial number 27441 and it appears to be all original. The seats in the front have a spring system on them, was this factory or did someone add it?
Willys Jeep Parts Tech:
The seats did originally have springs in them.
The seats did originally have springs in them.
Does the seat mount square behind the steering wheel or is it offset a little?
Willys Tech:
They are offset just a bit like original but it is pretty centered.
They are offset just a bit like original but it is pretty centered.
Does this seat include mounting hardware? If not, what is the part number for hardware? Thanks.
Willys Tech:
The hardware to bolt it down is just a HomeDepot item.
The hardware to bolt it down is just a HomeDepot item.
what are the dimensions?
Willys Tech:
They are just like the original frames.
They are just like the original frames.
Is this seat grey or black?
Willys Tech:
These are black.
These are black.
YOU MIGHT ALSO BE INTERESTED IN
