Questions & Answers
My 1963 CJ-5 Jeep has a drivers side seat that is 30 inches wide. Passenger seat is shorter (width) and flips forward for small toolbox underneath. I can send lots of pics. i am looking to replace the drivers side seat. Would you possibly have a seat like that?
Willys Jeep Parts Tech:
Send us photos so we can see it. Sounds like a 2/3 bench seat set up which is rare but nice!
Send us photos so we can see it. Sounds like a 2/3 bench seat set up which is rare but nice!
Would this work for a jeep m170?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com some photos of yours so we can see it. Thanks!
Please email mike@kaiserwillys.com some photos of yours so we can see it. Thanks!
The seat frame I have now mounts the left front leg to the top of the door frame rather than the floor board? is that normal for a 63 cj-5? Is that how this seat mounts to the jeep?
Willys Jeep Parts Tech:
Yes, that is correct. That is why the outside let is higher.
Yes, that is correct. That is why the outside let is higher.
How does it mount to the car?
Willys Jeep Parts Tech:
Bolts down like original.
Bolts down like original.
What is the height of the mounting leg that sits over the fuel tank?
Willys Jeep Parts Tech.:
Its a bit angled but you get approx 2-3 inches above the tank like original. I can Email you pics of our jeeps to show you.
Its a bit angled but you get approx 2-3 inches above the tank like original. I can Email you pics of our jeeps to show you.
WIll a Smittybilt Low-Back Bucket Seat fit on this frame?
Willys Jeep Parts Tech:
With modification it may work.
With modification it may work.
This will fit over the gas tank? And do I need the pan to either upolstyer or put seats or cushions covers on it?
Willys Jeep Parts Tech:
Yes, just like original. Search for 'cushion' on our website and hit the drop down box to select your vehicle for options. Or call us toll free.
Yes, just like original. Search for 'cushion' on our website and hit the drop down box to select your vehicle for options. Or call us toll free.
I have a 1959 Willys Sedan Delivery wagon with no seats and I am not sure what seat frame etc would fit. Thank you
Willys Jeep Parts Tech:
We have covers for it and can help with good used on the seat frames. Please email mike@kaiserwillys.com
We have covers for it and can help with good used on the seat frames. Please email mike@kaiserwillys.com
I have a 1960 CJ5 I need to replace the front seats, this seat frame pictured looks like a single "bucket" style and my front seats are a 60/40. Do you sell the factory 60/40 style I have?
Willys Jeep Parts Tech:
Nobody reproduces 60/40 seats. They are salvage yard only.
Nobody reproduces 60/40 seats. They are salvage yard only.
Will this fit in a 1965 Tuxedo Park Mark IV?
Willys Jeep Parts Tech:
Yes, that is correct. CJ-5 used a few different versions on seat frames so you may have to drill to mount, but the frame fits to the body properly.
Yes, that is correct. CJ-5 used a few different versions on seat frames so you may have to drill to mount, but the frame fits to the body properly.
Isn't this the same seat frame that is in the M38A1?
Willys Jeep Parts Tech:
Yes, it shows to fit the M38A1.
Yes, it shows to fit the M38A1.
I have modern/not original seats installed in my 1960 CJ-5. I would like to get back to original. Is it as simple as taking these new front seat frames to an upholstery group and have made? is there anything else I need to purchase from you? thanks
Willys Jeep Parts Tech:
Yes, that is correct. We can fix you all up with a complete set up. Please call us toll free. Ask for Mike M. Thanks!
Yes, that is correct. We can fix you all up with a complete set up. Please call us toll free. Ask for Mike M. Thanks!
I have a 1953 M38A1. The front leg, the one on the right in this picture, looks much to long for me. This leg on my driivers side seat is shorter and mounts on top on the gas tank. Do you have this type of seat?
Willys Jeep Parts Tech:
Sounds like you have something unoriginal going on. Please email mike@kaiserwillys.com your set up and I can take a look.
Sounds like you have something unoriginal going on. Please email mike@kaiserwillys.com your set up and I can take a look.
Hi Mike, looks like this will fit a 55 Cj5. The 55 Cj5 followed down the M38A1's production line and I have a M38's passenger seat installed which fit perfectly. If I'm correct, what needs to be down to this seat frame or the Cj itself to fit this frame to it? If I've chosen the wrong seat, please let me know which one to order. Tnx, Richard
Willys Jeep Parts Tech:
Yes, this seat frame will fit in the CJ-5 as well. On some you will have to drill to mount.
Yes, this seat frame will fit in the CJ-5 as well. On some you will have to drill to mount.
Have a 66 CJ5 and am looking for a used driver's side seat frame or seat. Alternatively, will the seat frame for the 52-66 M38A1 work for it instead?
Willys Tech:
It should work with some modification. I have had people put them in there CJ-5s.
It should work with some modification. I have had people put them in there CJ-5s.