Product Videos
Questions & Answers
Hi Mike, Hi Jason, When threading the studs into the block, can you recommend a sealant to use? The reason I ask is that the studs penetrate the water jacket and I really want to avoid any leaks if possible (have enough leaks already!). Thanks, Dan
Willys Jeep Parts Tech:
You can use some stud formula RTV. Pretty much any high temperature, waterproof RTV gasket maker will work.
You can use some stud formula RTV. Pretty much any high temperature, waterproof RTV gasket maker will work.
Will this work to attach the intake manifold to the block?
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
Do you have a kit for the 6-226?
Willys Jeep Parts Tech:
That we may be able to make a kit. Call us toll free. Ask for Mike M.
That we may be able to make a kit. Call us toll free. Ask for Mike M.
I recently broke off a stud in my block of a '61 CJ5. I was unable to use any extractors to remove it and was forced to drill it out. I have been able to remove all but just the thread location and am looking to use a tap to cut new threads. I wanted to confirm what is the diameter and NC for the Stud that goes into the Block? Thanks!
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can help with this.
Please email mike@kaiserwillys.com and we can help with this.
Are the nuts in this kit brass or plated steel.
Willys Jeep Parts Tech:
They are steel. Thanks
They are steel. Thanks
Why does the kit have a set of 8 Pieces when the manifold only uses 5 for fastening to the block. Not sure if mine was modified but it has 3 - 3/8-16 on the center ports and uses 7/16-14 on the end ports.
Willys Jeep Parts Tech:
You are correct. This kit comes with extra studs. Thanks
You are correct. This kit comes with extra studs. Thanks
YOU MIGHT ALSO BE INTERESTED IN
