Product Videos
Questions & Answers
Hello , Fred from switzerland,i don't have the olde wiper motor, possible to obtain in that case? thanks FRED
Willys Jeep Parts Tech:
Yes, email mike@kaiserwillys.com to help.
Yes, email mike@kaiserwillys.com to help.
I have 51 willys sedan. The original wiper motor works, It just needs a new gasket. Can I get one through you guys? Thanks Bert
Willys Jeep Parts Tech:
Give us a call and ask for Mike M.
Give us a call and ask for Mike M.
The hose that connects to my wiper actuator is putting out about 9psi/60kpa positive pressure off the fuel pump. Could that be a gasket problem on the pump itself?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com to help troubleshoot.
Please email mike@kaiserwillys.com to help troubleshoot.
i ask if this article goes well on a 62 truck thanks
Willys Jeep Parts Tech:
Yes, this is the part for the utility vehicles.
Yes, this is the part for the utility vehicles.
The wipers on my 55 truck kinda work — unless I am accelerating. There is currently only one rubber hose attached to the barbed fitting on the motor: is this correct, or is there supposed to be a second vacuum hose attached to the second barbed connection?
Willys Jeep Parts Tech:
That would be correct. I would check what kinda vacuum your fuel pump is putting out and we have rebuilt wiper motors too. But on acceleration they will run slower.
That would be correct. I would check what kinda vacuum your fuel pump is putting out and we have rebuilt wiper motors too. But on acceleration they will run slower.
How much vacuum is needed, i have a 1948 wagon with 327 SMC and holly intake Manifold with 15-20 #'s vacuum.
Willys Jeep Parts Tech:
That vacuum draw should be adequate.
That vacuum draw should be adequate.
Hi. Will this work on a 1953 Willys Aero Falcon. There is not one on the car to match
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com a picture of yours and we can see if we can match for you.
Please email mike@kaiserwillys.com a picture of yours and we can see if we can match for you.
Is it possible to get the rebuild kit for this unit. If so, can is get it through you? If not, can you tell me where in can get the kit.
Willys Tech:
Sorry we have to send in your old core. We can rebuild yours for you.
Sorry we have to send in your old core. We can rebuild yours for you.
where do the vacuum lines on a l6226 truck with a 2 barrel carb originate and connect? do you sell a gasket for the vacuum motor?
Willys Tech:
Typically off of your dual action fuel pump. Just the gasket you would have to make.
Typically off of your dual action fuel pump. Just the gasket you would have to make.
Do you sell the vacuume knob and cable replacement?
Willys Tech:
We have new knobs available. We can get the cable good used for you. Please call us toll free.
We have new knobs available. We can get the cable good used for you. Please call us toll free.
What happens if you don't have a core to send in?
Willys Tech:
I can get you a core. Please call us toll free.
I can get you a core. Please call us toll free.
YOU MIGHT ALSO BE INTERESTED IN
