Front Axle Shaft Nut (2 required per vehilce)
Fits 41-71 Willys & Jeep with Front Dana 25
Front Axle Shaft Nut (2 required per vehilce)
This is the proper castle nut originally used on the early threaded style from axle shafts in the Dana 25. This goes onto the end of your threaded axle shaft at the drive flange.
Application:
Dana 25 front with threaded axle shafts
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
53-71 M38A1
46-64 Truck
46-64 Station Wagon
Part # | Price |
---|---|
636569 | $13.99 MSRP: $13.99 |
$13.99
MSRP: $13.99
Questions & Answers
How do you adjust the nut tension?
If you have a threaded axle then you would use A864 or A866 to adjust the end play.
YOU MIGHT ALSO BE INTERESTED IN
Pinion Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 23/25/27/41/44
Part # 649228
$24.99
MSRP: $24.99
Drivers Side Steering Knuckle Support
Fits 46-66 CJ-2A, 3A, 3B, 5, M38, M38A1
Part # 805783
$74.99
MSRP: $74.99
Front Axle Bronze Spindle Bushing with Flange (RZEPPA and Spicer U Joints)
Fits 41-71 Jeep & Willys with Dana 25/27
Part # 649783
$7.74
MSRP: $7.74
Inner Pinion Bearing Cone (1 required per vehicle)
Fits 41-75 Jeep & Willys w/ Dana 25 front & 23/27/41/44 rear
Part # 807266
$29.99
MSRP: $29.99
Pinion Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 23/25/27/41/44
Part # 649228
$24.99
MSRP: $24.99
Drivers Side Steering Knuckle Support
Fits 46-66 CJ-2A, 3A, 3B, 5, M38, M38A1
Part # 805783
$74.99
MSRP: $74.99
Front Axle Bronze Spindle Bushing with Flange (RZEPPA and Spicer U Joints)
Fits 41-71 Jeep & Willys with Dana 25/27
Part # 649783
$7.74
MSRP: $7.74
Inner Pinion Bearing Cone (1 required per vehicle)
Fits 41-75 Jeep & Willys w/ Dana 25 front & 23/27/41/44 rear
Part # 807266
$29.99
MSRP: $29.99
Pinion Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 23/25/27/41/44
Part # 649228
$24.99
MSRP: $24.99