Product Videos
Questions & Answers
HI I going to rebuild front spring on 49 truck I will need r/l hand spring shackle's how many pivot eye bushing will I need?? do I need at top of shack?
Willys Jeep Parts Tech:
Yes, we have shackles, pivot eye bolts and bushing and any U-bolts you might need. Please email mike@Kaiserwillys.com or call us toll free to help.
Yes, we have shackles, pivot eye bolts and bushing and any U-bolts you might need. Please email mike@Kaiserwillys.com or call us toll free to help.
I have a straight axel Willys wagon 2 wheel drive with the leaf springs. The leaf spring have a wedge under them. What direction does that wedge go? Thank you.
Willys Jeep Parts Tech:
Give us a call and we can try to assist you.
Give us a call and we can try to assist you.
will these work with the added weight of a v8 conversion
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
I have a 54 PU 4WD and need new forward leaf springs. With only about 46K miles, I am assuming these are original. Can I get the exact 12 leaf replacement? I only see 11.
Willys Jeep Parts Tech:
They are only available in a 10 count and will set you back up to stock height.
They are only available in a 10 count and will set you back up to stock height.
What is the correct arc for front and rear leaf springs for a 57 pick up with a 226 engine?
Willys Jeep Parts Tech:
926709A and 919692
926709A and 919692
Will these leafs work in a 52 Willys pickup, swapping in a Dana 44 from a Gladiator?
Willys Jeep Parts Tech:
I have not tried to do that before but I don't see any issues with it.
I have not tried to do that before but I don't see any issues with it.
do you make these in a lifted spring? im doing something totally different for my 37 plymouth pickup and these springs are the same eye to eye ect but want something with a lift.
Willys Jeep Parts Tech:
Sorry these are not available in a lift kit.
Sorry these are not available in a lift kit.
HI we are putting new springs in a , FJ-3 FLEETVAN. Would the 10 leaf 926709A be OK for the front and the 11 leaf for the rear?
Willys Jeep Parts Tech:
Please call us toll free. We can confirm some measurements with you.
Please call us toll free. We can confirm some measurements with you.
I'm starting into a 61 overland, total restore project. I would like to see the truck set as level front to back as possible. I'm going to order a new set of front leafs to start. Do yous offer anything else to help lift it a little more if needed. I don't want it to set hgh just as close to level as possible. Thanks Jeff
Willys Jeep Parts Tech:
Our leaf spring assemblies will typically get you approx. 1" of raise from where you are at now because the old leaf springs have lost their arch. It will set you back up to stock height.
Our leaf spring assemblies will typically get you approx. 1" of raise from where you are at now because the old leaf springs have lost their arch. It will set you back up to stock height.
When I install this overdrive unit in my transfercase, can I keep the unit engaged without attaching the lever to it?
Willys Jeep Parts Tech:
This requires the shift linkage to be installed that comes with the kit to work properly.
This requires the shift linkage to be installed that comes with the kit to work properly.
I have a late 60's willys pickup. The front leaf springs have 11 leaves. I'm assuming the 10 leaf is the replacement? Thanks.
Willys Jeep Parts Tech:
Yes, this is a proper replacement for the front on your Willys Truck.
Yes, this is a proper replacement for the front on your Willys Truck.
My mechanic says my 59 truck is 47" from bolt to bolt. you product is 36". whos right? HELP
Willys Jeep parts tech:
Call us toll free and we can see what is going on with your vehicle and help you get the parts you need.
Call us toll free and we can see what is going on with your vehicle and help you get the parts you need.
good morning, looking over the 10 leaf springs for the front of my willys. Whats the difference between the 926709 and the 926709A ? thanks, Mike
Thanks again! If you ever have an issue please let us know.
Willys Tech:
They are the same part. They are an interchange for listing purposes.
They are the same part. They are an interchange for listing purposes.
My '57 4wd truck springs are in good condition however one of the retainer clamps (bands) on the spring assembly rotted and broke. Do you have replacements?
Willys Tech:
That you will have to make locally.
That you will have to make locally.
I'm getting ready to order new springs and shocks for my 1950 2wd truck. Do the springs come with the pivot eye bushing? Will I need to replace anything else?
Willys Tech:
The leaf springs are less the bushings. We do sell those as well. Please call us toll free.
The leaf springs are less the bushings. We do sell those as well. Please call us toll free.
I have a 55 pickup and have a chrysler 440 big block and TF727 automatic going in it. How well do you think these would hold up the front of the Jeep? A little bit of sage is ok. Because its a rat rod project, its going to have a little rake to it. Or what recomendations do you have for me?
Willys Tech:
These are heavy duty and will work perfect.
These are heavy duty and will work perfect.
does this come with one set of leaf springs or two?
Willys Tech:
This is for one side only.
This is for one side only.
These are suggested as the stock replacement in a 10 spring or an 8 spring pack. Does the 10 spring offer a little lift or is the stock height retained? Thanks--Les
Willys Tech:
Yes, they will both set you up to stock height.
Yes, they will both set you up to stock height.
YOU MIGHT ALSO BE INTERESTED IN
