Product Videos
Questions & Answers
what is the ohm resistance on the 24 volt sending unit
Willys Jeep Parts Tech:
0 to 30/35 range is what they read like original.
0 to 30/35 range is what they read like original.
I need a gastank sending unit 24 volt for my jeep willys CJ3A 1951 , the unit has 3 screws?
Willys Tech:
CJ-3A's were never 24 volt and were always 5 hole mounting to the tank. Please call us toll free. We can help you ID your vehicle and get you the right parts.
CJ-3A's were never 24 volt and were always 5 hole mounting to the tank. Please call us toll free. We can help you ID your vehicle and get you the right parts.
My fuel gauge reads full all the time how do you test the sending unit and I have it out of the tank its on 1952 m38
Willys Jeep Parts Tech:
You should be able to take an OHMs reader to the sending unit in the tank. I would also check your ground wire as well on the gauge.
You should be able to take an OHMs reader to the sending unit in the tank. I would also check your ground wire as well on the gauge.
I ordered this part for my m38, it's still a 24 volt system and the connector I have is the push and twist type like the rest of the electrical wire connectors. This new part has a rubber piece and not the brass female receptor? How do I proceed?
Willys Jeep Parts Tech:
Sounds like you have the metal douglas connectors. I may have a kit to help you. Please call us toll free. Ask for Mike M.
Sounds like you have the metal douglas connectors. I may have a kit to help you. Please call us toll free. Ask for Mike M.
Do you carry just the gaskets for the fuel sending unit for a 1952 M38? I have a new one and am missing the gasket for some reason.
Willys Jeep Parts Tech:
648927 is the part number for the M38 Jeep.
648927 is the part number for the M38 Jeep.
Hi...I need the fuel and vent line hoses from the gas tank on my M38. These are both threaded. Do you have them or at least know what the thread size is? Thanks
Willys Tech:
There really are no vent hoses on that vehicle. We do have the fuel lines part number: MS00202
There really are no vent hoses on that vehicle. We do have the fuel lines part number: MS00202
I am restoring a 1951 M38 jeep. It has been converted to 12 volt. Will this sending unit (24 volt) work with a 12 volt system, or, do I need a resistor of some sort to deal with the difference in voltage? Thanks
Willys Tech:
You can probably do this yes. You can also order the 5 hole sending unit for a earlier CJ but you will have to lengthen the arm to get a proper reading.
You can probably do this yes. You can also order the 5 hole sending unit for a earlier CJ but you will have to lengthen the arm to get a proper reading.
YOU MIGHT ALSO BE INTERESTED IN
