Fuel Tank Sending Unit (6 or 12 volt)
Fits 46-64 Truck
New Fuel Tank Sending Unit
Comes complete with mounting gasket. Float sits inside tank to give accurate reading to gauge. For 6 or 12 volt systems. Proper arm length guaranteed for a sure reading.
Fits:
46-64 Truck
| Part # | Price |
|---|---|
| 914849 | $42.99 MSRP: |
$42.99
MSRP:
Product Videos
Questions & Answers
Is this 5 or 6 hole. I have a 1950 1/2 converted to 12v. And Does gasket come with unit?
Willys Jeep Parts Tech:
This is a 6 hole sending unit and it DOES come with a gasket.
This is a 6 hole sending unit and it DOES come with a gasket.
Do you have the screws for the sending unit ?
Willys Jeep Parts Tech:
B0306 is the part number.
B0306 is the part number.
On this sending unit what are the measurements of the arm from the unit to the float? I am trying to find a unit that will fit my M170 fuel tank.
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com the exact measurement you need and we can help you out. Thanks!
Please email mike@kaiserwillys.com the exact measurement you need and we can help you out. Thanks!
Will fuel gauge 640763 work with this sending unit 914849?
Willys Jeep Parts Tech:
These two are not typically used together but you maybe able to modify it to work. Thanks
These two are not typically used together but you maybe able to modify it to work. Thanks
Will this float work in diesel fuel?
Willys Jeep Parts Tech:
I would assume so but they are made for gasoline engines.
I would assume so but they are made for gasoline engines.
If i order 914845A &914849 do they work together?
Willys Jeep Parts Tech:
Yes, these two work together. Thanks
Yes, these two work together. Thanks
I ordered 640694 sending unit. I am restoring a 59 DJ3A. The tank is in the rear and the unit I ordered is not the right one. How long is the arm on #914849? The one I took out is a 6 hole unit. it has a cork float and the arm length is 8 inches from the bend point to the center of the float. Any suggestions?
Willys Jeep Parts Tech:
Please call us toll free. We can help you get the right sending unit for your DJ-3A.
Please call us toll free. We can help you get the right sending unit for your DJ-3A.
Can the ohms on this sending unit to adjusted to have accurate readings for an after-market gas tank?
Willys Jeep Parts Tech:
No sorry, OHMs cant be adjusted. You can adjust the tabs that the arm bottoms out on however to get inside a range and fine tune
No sorry, OHMs cant be adjusted. You can adjust the tabs that the arm bottoms out on however to get inside a range and fine tune
Hi, at the time of ordering, should I indicate that needed 12 V? Is it plastic or brass float? Thanks.
Willys Tech:
These work on both 6volt and 12volt. They have a high quality plastic float.
These work on both 6volt and 12volt. They have a high quality plastic float.
I have a 1971 Jeep Commando, will this replace my 6 hole gas tank sending unit?
Willys Tech:
Yes as long as you have the 6 hole sending unit.
Yes as long as you have the 6 hole sending unit.
does this sending unit also have pick up tube for fuel line.
Willys Tech:
They never used that with the sending unit originally.
They never used that with the sending unit originally.
What are the Ohms on this sending unit full and empty?
Willys Tech:
8-10 Full and 70-80 Empty
8-10 Full and 70-80 Empty
YOU MIGHT ALSO BE INTERESTED IN
