Questions & Answers
I ordered your Jeep horn relay today, 30 July 2016 Item # 926919. Please give me a wiring diagram for that Relay. This will be the second relay I've ordered . The 1ST. was from another Company and I couldn't figure out the wireing. Thanks so much. Royce
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can scan it in and email you the diagram. Thanks!
Please email mike@kaiserwillys.com and we can scan it in and email you the diagram. Thanks!
We're is the horn relay located on a 1964 cj3b please
Willys Tech:
I beieve they were typically on the firewall or drivers side inner fender.
I beieve they were typically on the firewall or drivers side inner fender.
I have converted my 1950 cj3a to 12V... the original horn is 6V...It sounds ok on 6V only , do I need a voltage reducer AND relay for this to function properly...? Do you have voltage reducer's...?
Willys Tech:
Eventually it will burn out if you are running a 12 volt system on a 6 volt horn. It will be ok for a while but I wouldnt honk for too long if you dont want it to burn out.
Eventually it will burn out if you are running a 12 volt system on a 6 volt horn. It will be ok for a while but I wouldnt honk for too long if you dont want it to burn out.
i want to get my husband a horn for his willys jeep....is this a complete horn system.....thanks
Willys Tech:
This is the relay only. The horn is part number: 12VHORN
This is the relay only. The horn is part number: 12VHORN
When using a 12v aftermarket horn with one connection on a 1945 MB...do I need to add a relay for this thing to work with the original horn button in the steering wheel?
Willys Tech:
Yes you will need a relay.
Yes you will need a relay.