Questions & Answers
looking for ignition switch 1957 jeep willys 8 pin connector
Willys Jeep Parts Tech.:
A 57 Jeep would use part number 924918
A 57 Jeep would use part number 924918
does it matter which connection the different wire attach to. LIke ignition to coil and ignition to starter..
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com, thank you!
Please email mike@kaiserwillys.com, thank you!
Is this ignition and start or does it require a separate start switch?
Willys Jeep Parts Tech:
Yes, it has a start function.
Yes, it has a start function.
what size hole does this fit? I have a 1960 wagon with a 1" hole
Willys Jeep Parts Tech:
Yes, The outside of the threads measure: .802
Yes, The outside of the threads measure: .802
Would this work on a 1950 Jeepster?
Willys Jeep Parts Tech:
No, the correct switch for the early Jeepster is 924918. Thanks
No, the correct switch for the early Jeepster is 924918. Thanks
how do i remove old key cylinder ? doe's bezel on dash unscrew on 72 jeep commando?
Willys Jeep Parts Tech:
I believe there is a release that you can push in on the backside and twist with cylinder. Will have to check.
I believe there is a release that you can push in on the backside and twist with cylinder. Will have to check.
Do you also have a wiring diagram (potentially with color codes) for the ignition switch?
Willys Jeep Parts Tech:
I should be able to help out. Please email mike@kaiserwillys.com
I should be able to help out. Please email mike@kaiserwillys.com
1) Will this fit a 1973 CJ-5? 2) I've seen other sites offer a spring-loaded switch for the exact make, model and year, but this seems to just have a screw-on ring. Will that be sufficient to keep the switch from turning when I turn the key? Thanks, Ian
Willys Jeep Parts Tech:
I only show it fitting up to '71. This switch has the plug in connectors like the original with the twist on bezel. If this is style you're going for, I'm sure you can make it work. Thanks
I only show it fitting up to '71. This switch has the plug in connectors like the original with the twist on bezel. If this is style you're going for, I'm sure you can make it work. Thanks
Hi , My CJ5 has a plug on the back of ignition sw. is this the correct switch for a replacement and is the acc. position all the way to the left Thanks DG.
Willys Tech:
Please send me over some pics of what you have mike@kaiserwillys.com and I can take a look. Thanks!
Please send me over some pics of what you have mike@kaiserwillys.com and I can take a look. Thanks!
how many tab connectors does this switch have?
Willys Tech:
I believe 4
I believe 4
YOU MIGHT ALSO BE INTERESTED IN
