Product Videos
Questions & Answers
Will this gauge work with a 6 volt generator in a 1950 jeepster?
Willys Jeep Parts Tech:
Yes, this is set up for 6 volt. it is a 2" round gauge for mounting.
Yes, this is set up for 6 volt. it is a 2" round gauge for mounting.
Do you have any info on original p/n's? I have 0-15 VOLTS DC meter with p/n 1500596. It's a 2inch with 4 light slots, and olive wrap paint. It is old. Can you identify? thanks. ED
Willys Jeep Parts Tech:
That isnt a good part number for me. If you can though email an image of what you have there to mike@kaiserwillys.com and I can try to help. Thanks!
That isnt a good part number for me. If you can though email an image of what you have there to mike@kaiserwillys.com and I can try to help. Thanks!
I am looking for gauges for an m38 I am restoring which will be 12 volt. I am looking for gauges that have light slots around the sides like original so I can use original dash lights
Willys Jeep Parts Tech:
If you have a 12 volt system, the only gauges available are the ones for the CJ dash which always used a dash light for the gauges. The gauges themselves were never individually lightened. Thanks
If you have a 12 volt system, the only gauges available are the ones for the CJ dash which always used a dash light for the gauges. The gauges themselves were never individually lightened. Thanks
I read on a blog about the willys ammeter that the lead from battery (starter) to the ammeter should be an 8 gage wire. Correct? With a 12 volt alternator that has a built in regulator, would a voltmeter be better?
Willys Jeep Parts Tech:
If you have a alternator instead of a generator you should have a voltmeter on there instead.
If you have a alternator instead of a generator you should have a voltmeter on there instead.
What is the diameter of the guage?
Willys Jeep Parts Tech:
These are 2" like original for your Willys.
These are 2" like original for your Willys.
Will this work for a 66 wagoneer?
Willys Jeep Parts Tech:
I'm sure you can modify it to fit and work but it is a different gauge than what was used on it originally. Thanks
I'm sure you can modify it to fit and work but it is a different gauge than what was used on it originally. Thanks
I have a cj2a that I am restoring. The old guages are fine and were working. The new wiring harness that I purchased from you is excellent but!! The directions with the diagram state that wires be either on the left or right terminal. How do I determine right and left? When the amp meter is in the dash and I am under connecting, as I look at the back of the amp meter is the left terminal the correct one(the terminal toward the passenger side of the vehicle?
Willys Jeep Parts Tech:
It is as you look at the back of the gauge with the posts towards your chest.
It is as you look at the back of the gauge with the posts towards your chest.
what diameter is this ammeter
Willys Tech:
They are 2 guages like original.
They are 2 guages like original.
how do you wire in this amp gauge. I have a 1948 cj2a that has been switched to 12 volt and has an alternator
Willys Tech:
The back posts are all marked for easy wiring.
The back posts are all marked for easy wiring.
Does this guage come with a light or can it be added?
Willys Tech:
They originally used a external dash light on these vehicles. We sell them.
They originally used a external dash light on these vehicles. We sell them.
If an amp meter is connected to a battery without a disconnect, or without any other drain, would the battery run down?
Willys Tech:
I dont believe so but will have to check.
I dont believe so but will have to check.
any reason this will not work with 66 cj5? what is the diameter of gauge?
Willys Tech:
Im sure it would work fine in your CJ-5. It is a 2 gauge like original for the years listed.
Im sure it would work fine in your CJ-5. It is a 2 gauge like original for the years listed.
This 49 CJ3A has been converted to 12 with an alternator. Will this work, or do I need a voltage gauge?
Willys Tech:
This should work ok depending but you would have to check with the manufacter of the type of alternator.
This should work ok depending but you would have to check with the manufacter of the type of alternator.
YOU MIGHT ALSO BE INTERESTED IN
