Questions & Answers
I thought this required 3--- 2 on the outside of the needle bearings and one in the middle. Can you please verify? Thanks!
Harry Johnson:
Three spacers are required per the Jeep Universal Parts List. One spacer at each end of the needle bearing stack and one centered between the two stacks of needle bearings.
Three spacers are required per the Jeep Universal Parts List. One spacer at each end of the needle bearing stack and one centered between the two stacks of needle bearings.
Willys Jeep Parts Tech:
There should only be 2 required. If you look at this diagram taken out of the original manual, you can see #21 is on the outside and that there is nothing in between #25: https://www.kaiserwillys.com/diagram/cj-5-6-diagrams/transfercase-diagrams-willys-cj-5-6/dana-18-transfercase/dana-18-transfer-case Thanks
There should only be 2 required. If you look at this diagram taken out of the original manual, you can see #21 is on the outside and that there is nothing in between #25: https://www.kaiserwillys.com/diagram/cj-5-6-diagrams/transfercase-diagrams-willys-cj-5-6/dana-18-transfercase/dana-18-transfer-case Thanks
YOU MIGHT ALSO BE INTERESTED IN
