Leaf Spring Shackle Kit (Right Hand Thread)
Fits 41-58 MB, GPW, CJ-2A, 3A, 3B, 5, M38 (greasable)
New Replacement Leaf Spring Shackle Kit (2 required per vehicle)
For both front passenger side and rear driver side with open ended style shackle leaf spring assemblies.
Direct replacement shackle kit. Comes complete with (2) RH thread bushings, rubber cups, shackle, and grease fittings.
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-58 CJ-3B
55-58 CJ-5
50-52 M38
| Part # | Price |
|---|---|
| 802062 | $17.99 MSRP: |
$17.99
MSRP:
Product Videos
Questions & Answers
Is there a heavy duty shackle option for the 3A at all ?
Willys Jeep Parts Tech:
This really would be the only option for your vehicle.
This really would be the only option for your vehicle.
Hi, I need to change both leafspring suspensions in the rear for my CJ3-B 1964 and i was wondering for my leaf spring shackle kits if i could use 1x 802061 1x 802062? Thank you for your time
Willys Jeep Parts Tech:
Yes that is correct.
Yes that is correct.
On 2 brackets the upper bearing is allways turning (Probably bad treads on the brackets). Could I Tack weld the hexagone nut on the bracket to prevent the bearing from turning once installed? (Instead of changing the brackets?) Thanks YH
Willys Jeep Parts Tech:
See part number: A546 or A544 to fix this.
See part number: A546 or A544 to fix this.
How tight should the greasable shackle "bolts" be tightened?
Willys Jeep Parts Tech:
Head of the bushing should be snug against the frame bracket and the bushing in the spring eye is 1/32" away from the spring as measured from the inside of the hex head to the spring.
Head of the bushing should be snug against the frame bracket and the bushing in the spring eye is 1/32" away from the spring as measured from the inside of the hex head to the spring.
I have a 46 CJ2-a. I'm replacing only the rear springs so do I need left hand or right hand threads
Willys Jeep Parts Tech:
802062 and 802061 you need 1 of each part number.
802062 and 802061 you need 1 of each part number.
Will these work on a Bantam T3-C trailer?
Willys Jeep Parts Tech:
Yes, these typically do as long as its the same style you currently have on there.
Yes, these typically do as long as its the same style you currently have on there.
Will these shackles work with Rancho RS 44020 spring in a 45 GPW?
Willys Jeep Parts Tech:
You would have to contact Rancho on that.
You would have to contact Rancho on that.
I only need the rubber grease retaining cups for the shackles. The steel is still good. Is there a way to only purchase the rubber cups? I hate to waste the resources for the entire assembly. All the rubber is probably seventy some years old and is falling apart.
Willys Jeep Parts Tech:
I dont usually have those by themselves. But call me toll free. Ask for me Mike M. I can help you out. Thanks!
I dont usually have those by themselves. But call me toll free. Ask for me Mike M. I can help you out. Thanks!
I PURCHASED P/N 802062 FOR MY M38 RIGHT FRONT PASSENGER SIDE WHICH HAS CW TO TIGHTEN AND CCW TO REMOVE IT WORKED GREAT. NOW I CHECKED MY LEFT FRONT DRIVER SIDE AND IT IS THE SAME AS THE RIGHT SIDE SHOULD I ORDER THIS ONE. I ORDERED THE 802061 BUT PART OF THE SHACKLE IS LH THREAD AND RH THREAD. WILL NOT WORK'. BECAUSE THREADS IN BOTH BUSHINGS ARE RH THREAD TO TIGHTEN AND REMOVE. THANKS DONNIE
Willys Jeep Parts Tech:
Sounds like you need 802061 for your set up in that location.
Sounds like you need 802061 for your set up in that location.
Do you know if this shackle will work for my M416 trailer??
Willys Tech:
This should work for you. I would double check visually with the image above that yours are the same too.
This should work for you. I would double check visually with the image above that yours are the same too.
On my CJ3A the left front and right rear Shackle has one LH and one RH bushing. The kits seem to indicate all RH bushings but the manual indicates once a LH shackle bushing has been installed it is very difficult to replace with a RH thread. Do you have kits to allow for this original configuration?
Willys Tech:
802061 has the LH & RH threaded bushings.
802061 has the LH & RH threaded bushings.
I read in a Mechanics manual that later models of CJ series were manufactured with all RH thread. Is this true and would it be ok to install all RH thread shackles with bushings on a 48' CJ2A?
Willys Tech:
Alot of people do this and go to the RH threaded.
Alot of people do this and go to the RH threaded.
do you sell shackles & parts for cj 3b 1964
Willys Tech:
Typically they used this shackle or part number: 916646. You just need to match up what you have in your vehicle.
Typically they used this shackle or part number: 916646. You just need to match up what you have in your vehicle.
before i remove the spring hangers and remove the shackles and brackets from the frame because they are rusted and worn through.do they come in kits for all of the pieces needed. how do i know where the right hand and the left hand threaded shackles go when assembling.
Willys Tech:
Yes these are complete with fittings. You will know which when you take off the old ones. They will be either standard or reverse thread.
Yes these are complete with fittings. You will know which when you take off the old ones. They will be either standard or reverse thread.
I have a 1962 M170, it has 2 wide springs, is this shackle for a 2 wide spring?
Willys Tech:
The leaf springs on 41-58 MB, GPW, CJ-2A, 3A, 3B, M38 were 1-3/4 originally.
The leaf springs on 41-58 MB, GPW, CJ-2A, 3A, 3B, M38 were 1-3/4 originally.
When removing the spring shackles on my M-38, the front drivers side and the rear passenger side were left hand threads where connected to the springs. Is that correct?
Willys Tech:
Yes that is the most common set up.
Yes that is the most common set up.
Will this work with A-612 and A-614 closed ended style leaf springs?
Willys Tech:
Yes this is the proper shackle for those springs.
Yes this is the proper shackle for those springs.
we are interested in four Leaf Spring Shackle Kit , for CJ3B, please we want to know the shipping cost, thanks.
Willys Tech:
We ship daily UPS and USPS. Most orders over $98 in the US get free shipping
We ship daily UPS and USPS. Most orders over $98 in the US get free shipping
The leaf spring shackles appear to be threaded on outside, does that mean that the inside of the leaf spring where the shackle goes through is threaded also?
Willys Tech:
The shackle actually bites into the metal so people often think the springs are actually threaded.
The shackle actually bites into the metal so people often think the springs are actually threaded.
Do i need to buy 4 total items for both side leaf springs or does this one item come with both front and rear driver side shackle assemblies.
Willys Tech:
These are each. You will need 4 total shackles to do the whole Willys Jeep.
These are each. You will need 4 total shackles to do the whole Willys Jeep.
On the front drivers side. I have not removed the shackle yet, but, it appears the round tubing which is welded into the frame for the upper part of the shackle to go through is wallered out. Is that part available?
Willys Tech:
Yes, it is part number: A544
Yes, it is part number: A544
YOU MIGHT ALSO BE INTERESTED IN
