Product Videos
Questions & Answers
My 1951 CJ3A is one of the early ones with the DANA 41 rear axles. Which locker fits?
Willys Jeep Parts Tech:
LR2416 - but we can't get those right now.
LR2416 - but we can't get those right now.
I notice on both the 10 and 19 spline you do not list the 52 M38A1. Which one is correct?
Willys Jeep Parts Tech:
10 would be for that year M38A1
10 would be for that year M38A1
I want to modify a rear axle dana 44 10 spline tapered axle shafts by the dana 27 rear axle shafts and I want to add this locker, it will work?
Willys Jeep Parts Tech:
I dont think these will interchange. Please call toll free and ask for Mike M. I'll try to help out.
I dont think these will interchange. Please call toll free and ask for Mike M. I'll try to help out.
I am rebuilding an M38 motor. I see that my factory exhaust valves/keepers/retaining plates are different than the CJs, and this kit comes with CJ valves. So along with this kit I'll need qty4 637044 and qty8 375994? Also, are the pictures of the valve you have on this page pictures of the actual valves? Because the valves shown here look like my exhaust valves (which are supposed to be anomalies) and look nothing like my intake valves (which are supposed to be normal). Thank you.
Willys Jeep Parts Tech:
They used different valves thru the years for retainers or rotators. The M38 with the 4-134L head could have 802639 or 800829 valves in there. I can make up the kit for you. Please call and ask for Mike M.
They used different valves thru the years for retainers or rotators. The M38 with the 4-134L head could have 802639 or 800829 valves in there. I can make up the kit for you. Please call and ask for Mike M.
Do you know how manny splines my M38A1C from 1960 serial nr. 16899 do have on the rear axle?
Willys Jeep Parts Tech:
10 spline
10 spline
Where would I find proper installation instructions? There was no documentation in the box. Tx
Willys Jeep Parts Tech:
They are on the manufactures website or we can send them to you as well. Please email mike@kaiserwillys.com and we can help. Thanks!
They are on the manufactures website or we can send them to you as well. Please email mike@kaiserwillys.com and we can help. Thanks!
Just had a question about the splines. How do i figure out which rear i have with out taking the axle out? (if there even is a way to tell) marking or anything on the diff
Willys Tech:
Your rear end will be stamped by the pumpkin. Or if you want to take the cover off and get us the numbers off your ring or pinion and we can ID it for you.
Your rear end will be stamped by the pumpkin. Or if you want to take the cover off and get us the numbers off your ring or pinion and we can ID it for you.
YOU MIGHT ALSO BE INTERESTED IN
