Product Videos
Questions & Answers
Will this kit work with part number 994139 on a 65 cj5
Willys Jeep Tech:
927416K is what you want.
927416K is what you want.
What horn Button repair Kit can I use on my 1956 Station Wagon?
Willys Jeep Parts Tech:
Please see this diagram: https://www.kaiserwillys.com/diagram/wagon-diagrams/steering-diagrams-willys-wagon/steering-system-46-64-station-wagon/steering-system-willys-station-wagon
Please see this diagram: https://www.kaiserwillys.com/diagram/wagon-diagrams/steering-diagrams-willys-wagon/steering-system-46-64-station-wagon/steering-system-willys-station-wagon
can you run the wire for the horn down the steering column with out taking the steering column out? Basically fishing it through?
Willys Jeep Parts Tech:
Yes that is correct. Fishing it up from bottom is alot easier
Yes that is correct. Fishing it up from bottom is alot easier
What horn button do I need for a 1953 Truck Willis?
Willys Jeep Parts Tech:
649646 or 920208
649646 or 920208
Can I add this horn button and wiring through the dash instead of though the steering column? I'm wanting to put this button in a hole on the dash of my '47 Cj-2A.
Willys Jeep Parts Tech:
You would have to get creative but Im sure its possible.
You would have to get creative but Im sure its possible.
Where can I get the plug and tube for the horn wire to go thru at the bottom of the gear box?
Willys Jeep Parts Tech:
Salvage yard only. Please email mike@kaiserwillys.com
Salvage yard only. Please email mike@kaiserwillys.com
What is the thread pitch and dia for the nut. I want to chase the threads on the end of the shaft before re assembling.
Willys Jeep Parts Tech:
I do believe the end of the tube is an odd ball 13/16" x 20 thread count
I do believe the end of the tube is an odd ball 13/16" x 20 thread count
Can I get just the black horn button? That's all I need. Thanks.
Willys Jeep Parts Tech:
See 802359 is the minor kit.
See 802359 is the minor kit.
Whats the best method to solder the wire to the contact bushing?
Willys Jeep Parts Tech:
A solder gun and make sure to not use too much heat so that the bushing A302B does not loose its rubber insulation on the I.D. of the bushing to the worm gear.
A solder gun and make sure to not use too much heat so that the bushing A302B does not loose its rubber insulation on the I.D. of the bushing to the worm gear.
Is the internal thread 1.25 or is the outside measurement of the nut 1.25?
Willys Tech:
I do believe the rubber button is 1.25 across.
I do believe the rubber button is 1.25 across.
hi, i recieved my new horn replacement kit, but have one question. where or how do i connect the metal end of the horn wire, which i passed through the column, and out the hole about 4 inches above the steering box. there is a copper band, but no way to connect it. thanks.
Willys Tech:
You should have both of part numbers: A302 & A302B. It solders to the copper band. Make sure to not burn the rubber insulation away when doing so.
You should have both of part numbers: A302 & A302B. It solders to the copper band. Make sure to not burn the rubber insulation away when doing so.
I have purchased everything I thought may be needed to restore my horn from the push-button-on-the-dash method to a proper wheel button (I got the wheel, master horn button kit, bushing and horn contact brush. Is there a DIY or FAQ on how this all works, where the wires go, etc.?
Willys Tech:
If you like please call me toll free. We can walk you thru it.
If you like please call me toll free. We can walk you thru it.
how does this kit work when there is no access hole for the wiring in the column?
Willys Tech:
It depends on your vehicle but some came out thru a hole above the gear box on a separate contact and some went right out thru the bottom of the steering column itself thru the gear box.
It depends on your vehicle but some came out thru a hole above the gear box on a separate contact and some went right out thru the bottom of the steering column itself thru the gear box.
Will this fit a 1948 Willys PU
Willys Tech:
This is only for the vehicles listed above. We do have some horn repair parts for that vehicle. Search for 'horn' in the search parts box and filter by vehicle above.
This is only for the vehicles listed above. We do have some horn repair parts for that vehicle. Search for 'horn' in the search parts box and filter by vehicle above.
...looking for the repair kit for 1960 truck: wire with end that contacts the horn button inner cup, and bushing cup to guide wire into column.
Willys Tech:
We have the cushions, pins, and inner cup. The wiring and end pieces on that are available good used.
We have the cushions, pins, and inner cup. The wiring and end pieces on that are available good used.
Does a 1951 M38 jeep have a push rod for the horn ? IF SO, DO YOU HAVE A PART # AND COST
Willys Tech:
Please call us toll free. I do believe we may have some left.
Please call us toll free. I do believe we may have some left.
Where do you run the Wire out of the Steering box? Do I have to Drill a hole in the end Cap?
Willys Tech:
Early Willys it ran out above the steering gear box onto a separate bronze bushing and contact. Later it ran thru the center of the gear box thru a flute and out the bottom.
Early Willys it ran out above the steering gear box onto a separate bronze bushing and contact. Later it ran thru the center of the gear box thru a flute and out the bottom.
I have a 1947 Ford cj2a Jeep, all original and in working order. What do I have to watch for when ordering parts, ( Ford vs. Willys?
Willys Tech:
There is no such thing as a Ford CJ-2A. They were all Willys. Ford only made the GPW during 19471-45. As long as our parts description says it will fit your vehicle you are all set. If you have any questions please feel free to call us.
There is no such thing as a Ford CJ-2A. They were all Willys. Ford only made the GPW during 19471-45. As long as our parts description says it will fit your vehicle you are all set. If you have any questions please feel free to call us.
Where can I get a horn button for my 1946 CJ2A? Does it come with this package? Thanks, Harry
Willys Tech:
This has the horn button in it. It is complete.
This has the horn button in it. It is complete.
I have the pins and cushions for my 1950 - 1951 jeepster but what about the wire and button?
Willys Tech:
The inner horn button cup is part number: 638882 The wire is available good used or you can just get new wire there locally.
The inner horn button cup is part number: 638882 The wire is available good used or you can just get new wire there locally.
I have a 1950-1951 Jeepster. Will this part work?
Willys Tech:
We do have the proper pins and cushions for the Jeepster. This is for CJ's only.
We do have the proper pins and cushions for the Jeepster. This is for CJ's only.
I understand it wouldn't be original, but if I didn't want to fuss with the rod and so forth, couldn't I use this on my 12 volt converted M38? If it fits the CJ3A, shouldn't it work for me, too?
Willys Tech:
Im sure it would work fine running the wire instead.
Im sure it would work fine running the wire instead.
Where does the wire come out of the steering column?
Willys Tech:
Early CJ-2A's came out the hole above the tube and worm gear on a contact. Later they went straight out the bottom of the gear box thru the tube.
Early CJ-2A's came out the hole above the tube and worm gear on a contact. Later they went straight out the bottom of the gear box thru the tube.
I'm ordering the plastic horn button cover,steering wheel,pins and cushings for horn button cover so what electric components do I need to complete my horn setup...I'm already ordering the relay for the 12v setup so what harness or HORN BUTTON is required to complete the 51 willys truck
Willys Tech:
This is not for a Willys Truck. It is for the vehicles listed above only. We have the horn button, cushions, and pins inner cup available for the Willys Truck. Please call me toll free. I can help out.
This is not for a Willys Truck. It is for the vehicles listed above only. We have the horn button, cushions, and pins inner cup available for the Willys Truck. Please call me toll free. I can help out.
in which order do these parts go on and also there is nothing to screw the big silver bolt to on the steering wheel. i have a 1948 cj2a, there is just an open hole where the horn goes, am i missing any other parts that i need..
Willys Tech:
The nut screws onto the end of your tube & worm gear. Please call me toll free. I can walk you thru the install.
The nut screws onto the end of your tube & worm gear. Please call me toll free. I can walk you thru the install.
I have a '48 Jeepster and need a kit like this. Would this one work?
Willys Tech:
No, this is for CJ's only. The part number you want to order is: 643348K
No, this is for CJ's only. The part number you want to order is: 643348K
YOU MIGHT ALSO BE INTERESTED IN
