FREE Hat for orders $199+ Use: PINKHAT at checkout.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency

Africa
Americas
Asia
Europe
Oceania

Home » Shop by Vehicle » 41-45 MB » New Distributor Shaft Bronze Bushing (2 required) Fits 41-71 Jeep & Willys with 4-134 engine

New Distributor Shaft Bronze Bushing (2 required) Fits 41-71 Jeep & Willys with 4-134 engine

New Distributor Shaft Bronze Bushing (2 required) Fits 41-71 Jeep & Willys with 4-134 engine

New Distributor Shaft Bronze Bushing (2 required) Fits 41-71 Jeep & Willys with 4-134 engine

New Distributor Shaft Bronze Bushing (2 required) Fits 41-71 Jeep & Willys with 4-134 engine

New Distributor Shaft Bronze Bushing (2 required)
Fits 41-71 Jeep & Willys with 4-134 engine

Part # A1681

New Distributor Shaft Bronze Bushing (2 required per vehicle)

Application:
4-134 engine (6, 12 or 24 volts)

These bushings go in the housing where the shaft runs thru. One at the top and one at the bottom.

Speciatly original broze bushing used to stabilize the shaft on your distributor. This is usually the first thing to wear from the factory.

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-53 Truck
46-53 Station Wagon
48-51 Jeepster

Part #	Price
A1681	$8.99 MSRP: $8.99

$8.99

MSRP: $8.99

Questions & Answers

do i have to ream out the bushings after install on my m38

Willys Jeep Parts Tech:
With any bronze bushing you press into place the ID may mushroom in just a bit and its typical to hand ream to fit. A lot of times just some oil and fine grit will do the trick.

Hi Mike, Hi Jason, Does this install in engine block itself (upper part and lower by the oil pump)? If yes, how are the old bushings removed? Best regards, Dan

Willys Jeep Parts Tech:
This is the bushing inside the distributor housing itself for the shaft to ride on.

Do these work in delco #1112432 distributor came out of 53 jeep 4 cyl.

Willys Jeep Parts Tech:
No, unfortunately we do not list it to fit.

Do you have a replacement bushing for the distributor for an L 226 engine - Willys 1962 truck? Thanks and regards, Dave

Willys Jeep Parts Tech:
Sorry, I do not have a good listing currently for that.

It will fit in the M38 and M38A1 military 24V distributor? Thanks

Willys Jeep Parts Tech:
Yes, that is correct.

do i have to drill the holes for the oil flow (wicks) by myself ?

Willys Jeep Parts Tech:
No you wouldnt drill a hole in these.

Will this bushing fit my Autolite IAY 4401?

Willys Jeep Parts Tech:
Yes, as long as it's going in a 4 cylinder engine. Thanks

Hi , I have 6-226 with Delco Remy distributor 1110249 .Does this bushing work for that too? Thanks

Willys Jeep Parts Tech:
No, this is for the 4 cylinder engines only. Thanks

Browser warning

The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.

I understand, close this message